LittleFS for ESP-IDF. # What is LittleFS? [LittleFS](https://github.com/ARMmbed/littlefs) is a small fail-safe filesystem for microcontrollers. We ported LittleFS to esp-idf (specifically, the ESP32) because SPIFFS was too slow, and FAT was too fragile. # How to Use ## ESP-IDF There are two ways to add this component to your project 1. As a ESP-IDF managed component: In your project directory run ``` idf.py add-dependency joltwallet/littlefs==1.14.5 ``` 2. As a submodule: In your project, add this as a submodule to your `components/` directory. ``` git submodule add https://github.com/joltwallet/esp_littlefs.git git submodule update --init --recursive ``` The library can be configured via `idf.py menuconfig` under `Component config->LittleFS`. #### Example User @wreyford has kindly provided a [demo repo](https://github.com/wreyford/demo_esp_littlefs) showing the use of `esp_littlefs`. A modified copy exists in the `example/` directory. ## PlatformIO Add to the following line to your project's `platformio.ini` file: ``` lib_deps = https://github.com/joltwallet/esp_littlefs.git ``` Example `platformio.ini` file: ``` [env] platform = espressif32 framework = espidf monitor_speed = 115200 [common] lib_deps = https://github.com/joltwallet/esp_littlefs.git [env:nodemcu-32s] board = nodemcu-32s board_build.filesystem = littlefs board_build.partitions = min_littlefs.csv lib_deps = ${common.lib_deps} ``` Example `min_littlefs.cvs` flash partition layout: ``` # Name, Type, SubType, Offset, Size, Flags nvs, data, nvs, 0x9000, 0x5000, otadata, data, ota, 0xe000, 0x2000, app0, app, ota_0, 0x10000, 0x1E0000, app1, app, ota_1, 0x1F0000,0x1E0000, littlefs, data, spiffs, 0x3D0000,0x20000, coredump, data, coredump, 0x3F0000,0x10000, ``` [Currently, it is required](https://github.com/platformio/platform-espressif32/issues/479) to modify `CMakeList.txt`. Add the following 2 lines to the your project's `CMakeList.txt`: ``` get_filename_component(configName "${CMAKE_BINARY_DIR}" NAME) list(APPEND EXTRA_COMPONENT_DIRS "${CMAKE_SOURCE_DIR}/.pio/libdeps/${configName}/esp_littlefs") ``` Example `CMakeList.txt`: ``` cmake_minimum_required(VERSION 3.16.0) include($ENV{IDF_PATH}/tools/cmake/project.cmake) get_filename_component(configName "${CMAKE_BINARY_DIR}" NAME) list(APPEND EXTRA_COMPONENT_DIRS "${CMAKE_SOURCE_DIR}/.pio/libdeps/${configName}/esp_littlefs") project(my_project_name_here) ``` To configure LittleFS from PlatformIO, run the following command: ```console $ pio run -t menuconfig ``` An entry `Component config->LittleFS` should be available for configuration. If not, check your `CMakeList.txt` configuration. # Documentation See the official [ESP-IDF SPIFFS documentation](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/storage/spiffs.html), basically all the functionality is the same; just replace `spiffs` with `littlefs` in all function calls. Also see the comments in `include/esp_littlefs.h` Slight differences between this configuration and SPIFFS's configuration is in the `esp_vfs_littlefs_conf_t`: 1. `max_files` field doesn't exist since we removed the file limit, thanks to @X-Ryl669 2. `partition_label` is not allowed to be `NULL`. You must specify the partition name from your partition table. This is because there isn't a define `littlefs` partition subtype in `esp-idf`. The subtype doesn't matter. * Alternatively, you can specify an `esp_partition_t*` to a `partition` and set `partition_label=NULL`. 3. `grow_on_mount` will expand an existing filesystem to fill the partition. Defaults to `false`. * LittleFS filesystems can only grow, they cannot shrink. ### Filesystem Image Creation At compile time, a filesystem image can be created and flashed to the device by adding the following to your project's `CMakeLists.txt` file: ``` littlefs_create_partition_image(partition_name path_to_folder_containing_files) ``` For example, if your partition table looks like: ``` # Name, Type, SubType, Offset, Size, Flags nvs, data, nvs, 0x9000, 0x6000, phy_init, data, phy, 0xf000, 0x1000, factory, app, factory, 0x10000, 1M, graphics, data, spiffs, , 0xF0000, ``` and your project has a folder called `device_graphics`, your call should be: ``` littlefs_create_partition_image(graphics device_graphics) ``` # Performance Here are some naive benchmarks to give a vague indicator on performance. Tests were performed with the following configuration: * ESP-IDF: v4.4 * Target: ESP32 * CPU Clock: 160MHz * Flash SPI Freq: 80MHz * Flash SPI Mode: QIO In these tests, FAT has a cache size of 4096, and SPIFFS has a cahce size of 256 bytes. #### Formatting a 512KB partition ``` FAT: 549,494 us SPIFFS: 10,715,425 us LittleFS: 110,997 us ``` #### Writing 5 88KB files ``` FAT: 7,124,812 us SPIFFS*: 99,138,905 us LittleFS (cache=128): 8,261,920 us LittleFS (cache=512 default): 6,356,247 us LittleFS (cache=4096): 6,026,592 us *Only wrote 374,784 bytes instead of the benchmark 440,000, so this value is extrapolated ``` In the above test, SPIFFS drastically slows down as the filesystem fills up. Below is the specific breakdown of file write times for SPIFFS. Not sure what happens on the last file write. ``` SPIFFS: 88000 bytes written in 2190635 us 88000 bytes written in 2190321 us 88000 bytes written in 5133605 us 88000 bytes written in 16570667 us 22784 bytes written in 73053677 us ``` #### Reading 5 88KB files ``` FAT: 5,685,230 us SPIFFS*: 5,162,289 us LittleFS (cache=128): 6,284,142 us LittleFS (cache=512 default): 5,874,931 us LittleFS (cache=4096): 5,731,385 us *Only read 374,784 bytes instead of the benchmark 440,000, so this value is extrapolated ``` #### Deleting 5 88KB files ``` FAT: 680,358 us SPIFFS*: 1,653,500 us LittleFS (cache=128): 86,090 us LittleFS (cache=512 default): 53,705 us LittleFS (cache=4096): 27,709 us *The 5th file was smaller, did not extrapolate value. ``` # Tips, Tricks, and Gotchas * LittleFS operates on blocks, and blocks have a size of 4096 bytes on the ESP32. * A freshly formatted LittleFS will have 2 blocks in use, making it seem like 8KB are in use. * The esp32 has [flash concurrency constraints](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/spi_flash/spi_flash_concurrency.html#concurrency-constraints-for-flash-on-spi1). When using UART (either for data transfer or generic logging) at the same time, you *MUST* enable the following option in KConfig: `menuconfig > Component config > Driver config > UART > UART ISR in IRAM`. # Running Unit Tests To flash the unit-tester app and the unit-tests, clone or symbolicly link this component to `$IDF_PATH/tools/unit-test-app/components/littlefs`. Make sure the folder name is `littlefs`, not `esp_littlefs`. Then, run the following: ``` cd $IDF_PATH/tools/unit-test-app idf.py menuconfig # See notes idf.py -T littlefs -p YOUR_PORT_HERE flash monitor ``` In `menuconfig`: * Set the partition table to `components/littlefs/partition_table_unit_test_app.csv` * Double check your crystal frequency `ESP32_XTAL_FREQ_SEL`; my board doesn't work with autodetect. To test on an encrypted partition, add the `encrypted` flag to the `flash_test` partition in `partition_table_unit_test_app.csv`. I.e. ``` flash_test, data, spiffs, , 512K, encrypted ``` Also make sure that `CONFIG_SECURE_FLASH_ENC_ENABLED=y` in `menuconfig`. The unit tester can then be flashed via the command: ``` idf.py -T littlefs -p YOUR_PORT_HERE encrypted-flash monitor ``` # Breaking Changes * July 22, 2020 - Changed attribute type for file timestamp from `0` to `0x74` ('t' ascii value). * May 3, 2023 - All logging tags have been changed to a unified `esp_littlefs`. # Acknowledgement This code base was heavily modeled after the SPIFFS esp-idf component.
be2b096e5659cc98b35021cee33b64a561b534f4
idf.py add-dependency "joltwallet/littlefs^1.14.5"