bytebeamio/bytebeam-esp-idf-sdk

22 examples

• examples 11
  • actions_handling

    This example demonstrates how to manage actions triggered from the Bytebeam IoT Platform, utilizing an Espressif development board with ESP-IDF and…
  • basic_ota

    This example demonstrates how to perform over-the-air firmware upgrades using the Bytebeam IoT Platform on development boards with Espressif SoCs…
  • basic_ota_rollback

    This example demonstrates how to rollback over-the-air firmware upgrades from the Bytebeam IoT Platform, utilizing development boards with Espressif…
  • cloud_logging

    This example demonstrates how to log useful information to the Bytebeam IoT Platform using a development board with an Espressif SoC, enabling cloud-…
  • esp_touch

    This example demonstrates how to push board capacitive touch GPIO readings to the Bytebeam IoT Platform using an Espressif development board.
  • hello_wokwi

    This example demonstrates how to integrate Wokwi with the Bytebeam IoT Platform, using the Wokwi simulator for development without any hardware…
  • push_data

    This example demonstrates how to push data to the Bytebeam IoT Platform using an Espressif SoC development board. It involves configuring Wi-Fi…
  • setup_client

    This example demonstrates how to set up the client for the Bytebeam IoT Platform, requiring an Espressif development board and some software tools…
  • temp_humid

    This example demonstrates how to push the SHT31 sensor readings to the Bytebeam IoT Platform using a development board with an Espressif SoC.
  • toggle_led

    This example demonstrates how to control the LED GPIO from the Bytebeam IoT Platform using an Espressif SoC development board, such as the ESP32. It…
  • update_config

    This example demonstrates how to update device configurations from the Bytebeam IoT Platform using a development board with Espressif SoC. It…
• actions_handling

  5.45 KB
• basic_ota

  5.29 KB
• basic_ota_rollback

  5.97 KB
• cloud_logging

  5.87 KB
• esp_touch

  5.10 KB
• hello_wokwi
• push_data

  5.70 KB
• setup_client

  5.13 KB
• temp_humid

  6.54 KB
• toggle_led

  6.08 KB
• update_config

  6.88 KB