# Example for `hx711` driver ## What it does It shows averaged raw value from tensoresistor in a loop. ## Wiring Connect `PD/SCK` and `DOUT` pins to the following GPIOs: | Name | Description | Defaults | |------|-------------|----------| | `CONFIG_EXAMPLE_PD_SCK_GPIO` | GPIO number for `PD/SCK` pin | "4" for `esp8266` and `esp32c3`, "18" for `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_DOUT_GPIO` | GPIO number for `DOUT` pin | "5" for `esp8266` and `esp32c3`, "19" for `esp32`, `esp32s2`, and `esp32s3` | ## Notes Set averaging samples under `Example configuration` in `menuconfig` ( `CONFIG_EXAMPLE_AVG_TIMES` ). The default is 5.
To create a project from this example, run:
idf.py create-project-from-example "esp-idf-lib/hx711=1.0.4:default"