# Example for `ina260` driver ## Datasheet [INA260](https://www.ti.com/lit/ds/symlink/ina260.pdf) ## What it does The example configures a `ina260` device (triggered mode, 128 samples, 1.1ms conversion time). It shows voltage, current, and power in a loop. ## Wiring The example uses `0x40` as I2C address by default (`A0` and `A1` are grounded). Use `menuconfig` to change it. Connect `IN+` and `IN-` to the load. Connect `SCL` and `SDA` pins to the following pins with appropriate pull-up resistors. | Name | Description | Defaults | |------|-------------|----------| | `CONFIG_EXAMPLE_I2C_MASTER_SCL` | GPIO number for `SCL` | "5" for `esp8266`, "6" for `esp32c3`, "19" for `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_I2C_MASTER_SDA` | GPIO number for `SDA` | "4" for `esp8266`, "5" for `esp32c3`, "18" for `esp32`, `esp32s2`, and `esp32s3` |
To create a project from this example, run:
idf.py create-project-from-example "esp-idf-lib/ina260=1.0.5:default"