# Example for `ls7366r` driver ## Datasheet [LS7366R](https://www.lsicsi.com/datasheets/LS7366R.pdf) ## What it does The example configures a `ls7366r` device on a SPI bus. It creates a task to toggle `CONFIG_EXAMPLE_PIN_NUM_TEST` pin, and configures an interrupt handler to receive interrupts. It reads the counter value from the device in a loop. ## Wiring | Name | Description | Defaults | |------|-------------|----------| | `CONFIG_EXAMPLE_PIN_NUM_MOSI` | GPIO number for `MOSI` | "13" for `esp8266`, "23" for `esp32c3`, `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_PIN_NUM_MISO` | GPIO number for `MISO` | "12" for `esp8266`, "19" for `esp32c3`, `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_PIN_NUM_CLK` | GPIO number for `CLK` | "14" for `esp8266`, "18" for `esp32c3`, `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_PIN_CS` | GPIO number for `CS` | "15 for `esp8266`, "5" for `esp32c3`, `esp32`, `esp32s2`, and `esp32s3` | | `CONFIG_EXAMPLE_PIN_NUM_TEST` | GPIO number for test pin | "25" | | `CONFIG_EXAMPLE_PIN_NUM_INTR` | GPIO number for interrupt pin | "4" |
To create a project from this example, run:
idf.py create-project-from-example "esp-idf-lib/ls7366r=1.0.5:default"