This example shows how to use the CHSC6X touch controller with ESP32. It is designed to run on a Seeed Studio Round Display.
Seeed Studio Round Display (or any other dev board with a CHSC6X touch controller)
Plaintext
idf.py menuconfig
Set the hardware configuration for the example.
Build the project and flash it to the board, then run monitor tool to view serial output:
Plaintext
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-]
.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
To create a project from this example, run:
idf.py create-project-from-example "espp/chsc6x=1.0.9:example"