# ESP-BOX Board Support Package (BSP) Component [](https://components.espressif.com/components/espp/esp-box) The ESP32-S3-BOX and ESP32-S3-BOX-3 are development boards for the ESP32-S3 module. They feature a nice touchscreen display, an IMU, a speaker, microphones, and expansion headers. The `espp::EspBox` component provides a singleton hardware abstraction for initializing the touch, display, and audio subsystems, as well as automatically determining which version of the Box it's running on. The audio subsystem is built on the [`espp::Audio`](../audio) component and runs full duplex on one I2S bus: `initialize_audio()` sets up playback, recording or both (an `AudioConfig`, i.e. `espp::Audio::AppConfig`, started from `EspBox::default_audio_config()`), `play_audio()` streams 16-bit stereo out through the ES8311 codec and speaker, and `start_audio_recording()` delivers 16-bit stereo recordings from the dual microphone array (through the ES7210 ADC, with adjustable gain via `microphone_volume()`) at the speaker's sample rate. `audio()` returns the underlying `espp::Audio` for anything else. The older `initialize_sound()`, `enable_sound()` and `initialize_microphone()` are kept as deprecated forwarders. ## Example The [example](./example) shows how to use the `espp::EspBox` hardware abstraction component to automatically detect and initialize components on both the ESP32-S3-BOX and the ESP32-S3-BOX-3.
c14f415102836460c6188798ea10e03de79062cc
idf.py add-dependency "espp/esp-box^1.4.5"