example

# RX8130CE Example

This example shows how to use the RX8130CE RTC driver to set and get the time.

## How to use example

### Hardware Required

This example can be run on any ESP32-based board, the RX8130CE is connected to
the ESP32 via I2C.

You can use `menuconfig` to configure the I2C pins and frequency used by the example.

### Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

```
idf.py -p PORT flash monitor
```

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type ``Ctrl-]``.)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

## Example Output