uploaded 11 months ago
EXT CONN driver
readme
# ESP External Connection
This component provides external wireless connectivity(Wi-Fi & Bluetooth) for ESP chips that do not have built-in wireless capabilities. The APIs used by this component are compatible with the Wi-Fi and Bluetooth component APIs in the ESP-IDF.
## Supported Features
<table>
<tr>
<th>Features</th>
<th>Supported</th>
<th>Sill not Supported </th>
</tr>
<tr>
<td>Virtual Wi-Fi interfaces</td>
<td>Station, SoftAP</td>
<td>Sniffer, Wi-Fi Aware (NAN)</td>
</tr>
<tr>
<td>Wi-Fi Modes</td>
<td>Station, SoftAP, Station/AP-coexistence mode</td>
<td></td>
</tr>
<tr>
<td>Wi-Fi Protocols</td>
<td>802.11 b/g/n</td>
<td></td>
</tr>
<tr>
<td>Wi-Fi Security Modes</td>
<td>Open / WPA / WPA2 / WPA3 / WPA2-Enterprise / WPA3-Enterprise / WPS</td>
<td>WAPI / DPP</td>
</tr>
<tr>
<td>Power Save</td>
<td></td>
<td>Modem-sleep</td>
</tr>
<tr>
<td>Wi-Fi Data Transmission</td>
<td>AMSDU, AMPDU, HT40, QoS</td>
<td></td>
</tr>
<tr>
<td>Vendor Features</td>
<td></td>
<td>ESP-NOW, Long Range mode, SmartConfig, Channel State Information</td>
</tr>
<tr>
<td>Scan</td>
<td>Fast scan, All-channel scan</td>
<td></td>
</tr>
<tr>
<td>Antennas</td>
<td></td>
<td>Multiple</td>
</tr>
<tr>
<td>Bluetooth features</td>
<td>Classic Bluetooth, BLE 4.2</td>
<td></td>
</tr>
</table>
## Supported ESP Chips
* Supported Host : **ESP32P4**
* Supported Target : **ESP8689**
## Supported Boards
* ESP32-P4_Function_EV_Board with ESP32_Module_SDIO_Converter_Board
* Hardware setup
- Pin Connections
| ESP32P4 | ESP8689 | Function |
| :-----: | :-----: | :------------------------------: |
| 53 | EN | Reset |
| GND | IO0 | Forcing ESP8689 in download mode |
- The ESP32P4 controls the reset of the ESP8689 through pin 53.
## Supported Transports
* SDIO Only
* Wi-Fi and Bluetooth, traffic for both runs over SDIO
## Supported APIs
<table>
<tr>
<th>Classification</th>
<th>Supported APIs</th>
</tr>
<tr>
<td rowspan="2"style="text-align:center; vertical-align:middle;">Initialization</td>
<td>esp_wifi_<b>init</b> / esp_wifi_<b>deinit</b></td>
</tr>
<tr>
<td>esp_wifi_<b>start</b> / esp_wifi_<b>stop</b></td>
</tr>
<tr>
<td rowspan="13"style="text-align:center; vertical-align:middle;">Configuration</td>
<td>esp_wifi_<b>set_mode</b> / esp_wifi_<b>get_mode</b></td>
</tr>
<tr>
<td>esp_wifi_<b>set_config</b> / esp_wifi_<b>get_config</b></td>
</tr>
<tr>
<td>esp_wifi_<b>set_storage</b></td>
</tr>
<tr>
<td>esp_wifi_<b>set_protocol</b> / esp_wifi_<b>get_protocol</b></td>
</tr>
<tr>
<td>esp_wifi_<b>set_country</b> / esp_wifi_<b>get_country</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_country_code</b> / esp_wifi_<b>get_country_code</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_bandwidth</b> / esp_wifi_<b>get_bandwidth</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_mac</b> / esp_wifi_<b>get_mac</b></td>
</tr>
<tr>
<td> esp_wifi_<b>restore</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_vendor_ie</b> / esp_wifi_<b>set_vendor_ie_cb</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_channel</b> / esp_wifi_<b>get_channel</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_inactive_time</b> / esp_wifi_<b>get_inactive_time</b></td>
</tr>
<tr>
<td> esp_wifi_<b>set_rssi_threshold</b>
</tr>
<tr>
<td rowspan="7"style="text-align:center; vertical-align:middle;">Connection</td>
<td>esp_wifi_<b>connect</b> / esp_wifi_<b>disconnect</b></td>
</tr>
<tr>
<td>esp_wifi_<b>sta_get_aid</b> / esp_wifi_<b>ap_get_sta_aid</b></td>
</tr>
<tr>
<td>esp_wifi_<b>sta_get_ap_info</b></td>
</tr>
<tr>
<td>esp_wifi_ap_<b>get_sta_list_with_ip</b> / esp_wifi_ap_<b>get_sta_list</b></td>
</tr>
<tr>
<td>esp_wifi_<b>deauth_sta</b></td>
</tr>
<tr>
<td>esp_wifi_<b>sta_get_rssi</b></td>
</tr>
<tr>
<td>esp_wifi_<b>sta_get_negotiated_phymode</b></td>
</tr>
<tr>
<td rowspan="5"style="text-align:center; vertical-align:middle;">Scan</td>
<td>esp_wifi_<b>scan_start</b> / esp_wifi_<b>scan_stop</b></td>
</tr>
<tr>
<td>esp_wifi_<b>set_scan_parameters</b> / esp_wifi_<b>get_scan_parameters</b></td>
</tr>
<tr>
<td>esp_wifi_<b>scan_get_ap_num</b></td>
</tr>
<tr>
<td>esp_wifi_scan_get_ap_<b>records</b> / esp_wifi_scan_get_ap_<b>record</b></td>
</tr>
<tr>
<td>esp_wifi_<b>clear_ap_list</b></td>
</tr>
<tr>
<td rowspan="2"style="text-align:center; vertical-align:middle;">Others</td>
<td>esp_wifi_<b>80211_tx</b></td>
</tr>
<tr>
<td>esp_wifi_<b>statis_dump</b></td>
</tr>
</table>
## Step to enable this component in an example code:
1. Add this component to your project using ```idf.py add-dependency esp-extconn``` command.
2. In the main file of the example, add the following line:
```c
#ifdef CONFIG_ESP_EXT_CONN_ENABLE
#include "esp_extconn.h"
#endif
```
3. In your app_main() function, add the following line as the first line:
```c
#ifdef CONFIG_ESP_EXT_CONN_ENABLE
esp_extconn_config_t config = ESP_EXTCONN_CONFIG_DEFAULT();
esp_extconn_init(&config);
#endif
```
4. Using esp_wifi components like built-in wireless chips :)
## Throughput Performance
### 1. Parameters
<table border="1" cellspacing="0" cellpadding="5">
<tr>
<td colspan="2", style="text-align: center; font-size: 20px; font-weight: bold;">Parameters</td>
<td style="font-size: 20px; font-weight: bold;">Value</td>
</tr>
<tr>
<td rowspan="3"> System Parameters </td>
<td>CACHE_L2_CACHE</td>
<td>128 KB</td>
</tr>
<tr>
<td>CACHE_L2_CACHE_LINE</td>
<td>64 B</td>
</tr>
<tr>
<td>FREERTOS_HZ</td>
<td>100 Hz</td>
</tr>
<tr>
<td rowspan="6"> Wi-Fi Parameters </td>
<td>WIFI_STATIC_RX_BUFFER_NUM</td>
<td>24</td>
</tr>
<tr>
<td>WIFI_DYNAMIC_RX_BUFFER_NUM</td>
<td>128</td>
</tr>
<tr>
<td>WIFI_DYNAMIC_TX_BUFFER_NUM</td>
<td>128</td>
</tr>
<tr>
<td>WIFI_RX_BA_WIN</td>
<td>32</td>
</tr>
<tr>
<td>WIFI_IRAM_OPT</td>
<td>y</td>
</tr>
<tr>
<td>WIFI_RX_IRAM_OPT </td>
<td>y</td>
</tr>
<tr>
<td rowspan="7"> Lwip Parameters </td>
<td>LWIP_IRAM_OPTIMIZATION</td>
<td>y</td>
</tr>
<tr>
<td>LWIP_TCPIP_RECVMBOX_SIZE</td>
<td>64</td>
</tr>
<tr>
<td>LWIP_TCP_WND_DEFAULT</td>
<td>65535</td>
</tr>
<tr>
<td>LWIP_TCP_SND_BUF_DEFAULT</td>
<td>65535</td>
</tr>
<tr>
<td>LWIP_TCP_RECVMBOX_SIZE</td>
<td>64</td>
</tr>
<tr>
<td>LWIP_TCP_ACCEPTMBOX_SIZE</td>
<td>64</td>
</tr>
<tr>
<td>LWIP_UDP_RECVMBOX_SIZE</td>
<td>64</td>
</tr>
<tr>
<td rowspan="10"> Tasks Parameters </td>
<td>Iperf traffic Core ID</td>
<td>0</td>
</tr>
<tr>
<td>Iperf traffic Priority</td>
<td>23</td>
</tr>
<tr>
<td>Lwip Core ID</td>
<td>0</td>
</tr>
<tr>
<td>Lwip Priority</td>
<td>23</td>
</tr>
<tr>
<td>Wi-Fi Core ID</td>
<td>0</td>
</tr>
<tr>
<td>Wi-Fi Priority</td>
<td>23</td>
</tr>
<tr>
<td>SDIO TX Core ID</td>
<td>1</td>
</tr>
<tr>
<td>SDIO TX Priority</td>
<td>24</td>
</tr>
<tr>
<td>SDIO RX Core ID</td>
<td>1</td>
</tr>
<tr>
<td>SDIO RX Priority</td>
<td>23</td>
</tr>
<tr>
<td rowspan="4"> Router parameters </td>
<td>Type</td>
<td>ASUS RT-AX88U Pro</td>
</tr>
<tr>
<td>Bandwidth</td>
<td>40MHZ</td>
</tr>
<tr>
<td>Beacon interval (ms)</td>
<td>1000</td>
</tr>
<tr>
<td>Mode</td>
<td>N only</td>
</tr>
</table>
### 2. Performance
#### 1. TCP TX
```sh
[ ID] Interval Transfer Bandwidth
[ 1] 0.0000-1.0000 sec 5.69 MBytes 47.7 Mbits/sec
[ 1] 1.0000-2.0000 sec 5.77 MBytes 48.4 Mbits/sec
[ 1] 2.0000-3.0000 sec 5.79 MBytes 48.6 Mbits/sec
[ 1] 3.0000-4.0000 sec 5.81 MBytes 48.8 Mbits/sec
[ 1] 4.0000-5.0000 sec 5.90 MBytes 49.5 Mbits/sec
[ 1] 5.0000-6.0000 sec 5.87 MBytes 49.2 Mbits/sec
[ 1] 6.0000-7.0000 sec 5.88 MBytes 49.3 Mbits/sec
[ 1] 7.0000-8.0000 sec 5.80 MBytes 48.6 Mbits/sec
[ 1] 8.0000-9.0000 sec 5.80 MBytes 48.6 Mbits/sec
[ 1] 9.0000-10.0000 sec 5.79 MBytes 48.6 Mbits/sec
[ 1] 0.0000-10.0053 sec 58.1 MBytes 48.7 Mbits/sec
```
#### 2. TCP RX
```sh
Interval Bandwidth
0.0- 1.0 sec 51.24 Mbits/sec
1.0- 2.0 sec 51.04 Mbits/sec
2.0- 3.0 sec 51.59 Mbits/sec
3.0- 4.0 sec 51.44 Mbits/sec
4.0- 5.0 sec 51.58 Mbits/sec
5.0- 6.0 sec 51.45 Mbits/sec
6.0- 7.0 sec 51.25 Mbits/sec
7.0- 8.0 sec 51.91 Mbits/sec
8.0- 9.0 sec 51.66 Mbits/sec
9.0-10.0 sec 51.21 Mbits/sec
0.0-10.0 sec 51.44 Mbits/sec
```
#### 3. UDP TX
```sh
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 1] 0.0000-1.0000 sec 7.69 MBytes 64.5 Mbits/sec 0.178 ms 0/5558 (0%)
[ 1] 1.0000-2.0000 sec 7.72 MBytes 64.7 Mbits/sec 0.172 ms 0/5580 (0%)
[ 1] 2.0000-3.0000 sec 7.73 MBytes 64.8 Mbits/sec 0.196 ms 0/5589 (0%)
[ 1] 3.0000-4.0000 sec 7.71 MBytes 64.7 Mbits/sec 0.178 ms 0/5576 (0%)
[ 1] 4.0000-5.0000 sec 7.72 MBytes 64.8 Mbits/sec 0.167 ms 0/5583 (0%)
[ 1] 5.0000-6.0000 sec 7.73 MBytes 64.8 Mbits/sec 0.163 ms 0/5588 (0%)
[ 1] 6.0000-7.0000 sec 7.73 MBytes 64.9 Mbits/sec 0.168 ms 22/5615 (0.39%)
[ 1] 7.0000-8.0000 sec 7.73 MBytes 64.8 Mbits/sec 0.177 ms 24/5614 (0.43%)
[ 1] 8.0000-9.0000 sec 7.72 MBytes 64.8 Mbits/sec 0.171 ms 20/5606 (0.36%)
[ 1] 9.0000-10.0000 sec 7.72 MBytes 64.7 Mbits/sec 0.176 ms 27/5607 (0.48%)
[ 1] 0.0000-10.0010 sec 77.2 MBytes 64.8 Mbits/sec 0.195 ms 93/55922 (0.17%)
```
#### 4. UDP RX
```sh
Interval Bandwidth
0.0- 1.0 sec 84.16 Mbits/sec
1.0- 2.0 sec 84.34 Mbits/sec
2.0- 3.0 sec 84.43 Mbits/sec
3.0- 4.0 sec 84.14 Mbits/sec
4.0- 5.0 sec 83.56 Mbits/sec
5.0- 6.0 sec 84.45 Mbits/sec
6.0- 7.0 sec 84.57 Mbits/sec
7.0- 8.0 sec 84.20 Mbits/sec
8.0- 9.0 sec 83.71 Mbits/sec
9.0-10.0 sec 83.86 Mbits/sec
0.0-10.0 sec 84.14 Mbits/sec
```
> **Note : Due to the limited clock frequency (40M) of SDIO, there may be slight packet loss in the UDP TX direction.**
Links
-
Repository
f3d4edee0dce6543218071f4f9478239ec75f2d2
Supports all targets
License: Apache-2.0
To add this component to your project, run:
download archive
idf.py add-dependency "espressif/esp-extconn^0.1.0-test"
Stats
-
Archive size ~ 316.43 KB
-
Downloaded in total 6.6k times
-
This version: 1 time
Badge
