get-started

Example of the component espressif/esp-now v2.3.0
# Get Started Example

This example demonstrates how to use the ESP-NOW data to communicate.

## Functionality

One device receives data through the serial port and broadcasts it to all nodes through ESP-NOW data. The others will output the data through the serial port when receive the data.

## Hardware Required

This example can run on any ESP32 series boards and at least two development boards are required.

## Configuration

Open the project configuration menu (`idf.py menuconfig`) to configure the packet retransmission counts and the UART port for data communication using (Refer to Kconfig file).

## Example Output

- Output sample from the receiving device:

<div align=center>
<img src="../../docs/_static/en/device_log.png" width="550">
<p> Packet receiving device log </p>
</div>

- Output sample from the sending device:

<div align=center>
<img src="../../docs/_static/en/serial_port.png" width="550">
<p> The log of the sending device </p>
</div>

To create a project from this example, run:

idf.py create-project-from-example "espressif/esp-now^2.3.0:get-started"

or download archive