hello_world

Example of the component espressif/esp-tflite-micro v1.3.0
# Hello World Example

This example is designed to demonstrate the absolute basics of using [TensorFlow
Lite for Microcontrollers](https://www.tensorflow.org/lite/microcontrollers).
It includes the full end-to-end workflow of training a model, converting it for
use with TensorFlow Lite for Microcontrollers for running inference on a
microcontroller.

The model is trained to replicate a `sine` function and generates a pattern of
data to either blink LEDs or control an animation, depending on the capabilities
of the device.

## Deploy to ESP32

The following instructions will help you build and deploy this sample
to [ESP32](https://www.espressif.com/en/products/hardware/esp32/overview)
devices using the [ESP IDF](https://github.com/espressif/esp-idf).

The sample has been tested on ESP-IDF version `release/v4.2` and `release/v4.4` with the following devices:
- [ESP32-DevKitC](http://esp-idf.readthedocs.io/en/latest/get-started/get-started-devkitc.html)
- [ESP32-S3-DevKitC](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html)
- [ESP-EYE](https://github.com/espressif/esp-who/blob/master/docs/en/get-started/ESP-EYE_Getting_Started_Guide.md)

### Install the ESP IDF

Follow the instructions of the
[ESP-IDF get started guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html)
to setup the toolchain and the ESP-IDF itself.

The next steps assume that the
[IDF environment variables are set](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#step-4-set-up-the-environment-variables) :

 * The `IDF_PATH` environment variable is set
 * `idf.py` and Xtensa-esp32 tools (e.g. `xtensa-esp32-elf-gcc`) are in `$PATH`


### Building the example

Set the chip target (For esp32s3 target, IDF version `release/v4.4` is needed):

```
idf.py set-target esp32s3
```

Then build with `idf.py`
```
idf.py build
```

### Load and run the example

To flash (replace `/dev/ttyUSB0` with the device serial port):
```
idf.py --port /dev/ttyUSB0 flash
```

Monitor the serial output:
```
idf.py --port /dev/ttyUSB0 monitor
```

Use `Ctrl+]` to exit.

The previous two commands can be combined:
```
idf.py --port /dev/ttyUSB0 flash monitor
```

To create a project from this example, run:

idf.py create-project-from-example "espressif/esp-tflite-micro^1.3.0:hello_world"

or download archive (83 bytes)