espressif/esp_hosted

19 examples

• host_bluedroid_ble_compatibility_test

  This example is designed to test Bluetooth compatibility with mobile phones, utilizing the ESP32-P4 Dev Board as the BT Host connected to an ESP32…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile, simulating a Bluetooth HID mouse that…

  10.70 KB
• host_bluedroid_host_only

  This is a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It supports ESP32-P4 Dev Board…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC Address of a BLE device, displaying it as `Bluedroid_Beacon`. Further modifications can be made to…

  7.47 KB
• host_gpio_expander

  This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of a slave co-processor from the host MCU, allowing the host to…

  2.89 KB
• host_hosted_cp_meminfo

  This host example allows for monitoring the heap usage on the ESP32 co-processor by enabling a memory monitor. Users can query heap usage at any…

  11.73 KB
• host_hosted_events

  This example demonstrates how to use ESP-Hosted events to detect when a co-processor has reset or hung, taking necessary actions to reinitialize ESP-…

  11.68 KB
• host_manage_copro_ext_coex

  This host-side example demonstrates how to configure and use External Coexistence (EXT_COEX) in ESP-Hosted co-processor, leveraging the Packet…

  4.17 KB
• host_network_split__power_save

  This example demonstrates the combination of two key ESP-Hosted features: Network Split and Host Deep Sleep. It enables the host MCU to save energy…

  17.68 KB
• host_nimble_bleprph_host_only_uart_hci

  This README provides an overview of the BLE Peripheral Example, which uses a UART transport written by the application. It includes instructions on…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted. To utilize the Hosted HCI transport, disable the Bluetooth controller…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing maximum control over data formats…

  5.72 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA, allowing updates to slave firmware through the existing ESP-Hosted connection (SDIO/SPI/UART)…

  36.98 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO for communication with the ESP32-C6. It…

  12.44 KB
• host_shuts_down_slave_to_power_save

  This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting the slave down when idle and waking it up on…

  7.28 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It covers obtaining the default…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt of wifi, which only works in station mode and requires an AP that supports it. Itwt operates under different power…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example showcases firmware enabling host MCUs to access Wi-Fi and Bluetooth connectivity via ESP32 series co-processors…

  487.03 KB