uploaded 3 hours ago
ESP-Hosted-MCU provide drivers to act any ESP chipset as Wi-Fi or Bluetooth co-processor.
-
host_bluedroid_ble_compatibility_test
This example is to test the Bluetooth compatibility and mobile phones, modified to work with ESP-Hosted. It runs on the ESP32-P4 Dev Board as the BT…
Archive size ~ 12.51 KB
-
host_bluedroid_bt_hid_mouse_device
This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…
Archive size ~ 10.70 KB
-
host_bluedroid_host_only
This example demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It supports ESP32…
Archive size ~ 6.14 KB
-
host_bt_controller_mac_addr
This example demonstrates how to change the MAC address for a BLE device, showing a `Bluedroid_Beacon` device when run. For further details, refer to…
Archive size ~ 7.60 KB
-
host_gpio_expander
This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of the slave (co-processor) from the host MCU, allowing the host to…
Archive size ~ 2.89 KB
-
host_hosted_cp_meminfo
This host example enables a memory monitor on the ESP32 co-processor, allowing the host to query heap usage, receive periodic memory reports, or…
Archive size ~ 11.73 KB
-
host_hosted_events
This example demonstrates the use of ESP-Hosted events to detect when a co-processor has reset or hung, enabling the reinitialization of ESP-Hosted…
Archive size ~ 11.68 KB
-
host_manage_copro_ext_coex
This host side example demonstrates how to configure and use External Coexistence (EXT_COEX) in ESP-Hosted co-processor. The ESP co-processor manages…
Archive size ~ 4.17 KB
-
host_network_split__power_save
This example demonstrates the integration of **Network Split** and **Host Deep Sleep** features in ESP-Hosted systems, enabling the host MCU to save…
Archive size ~ 17.68 KB
-
host_nimble_bleprph_host_only_uart_hci
This example utilizes UART transport created by the application itself, demonstrating how to connect ESP32-P4 with another ESP32 over UART. It…
Archive size ~ 501.02 KB
-
host_nimble_bleprph_host_only_vhci
This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller to be disabled and the default UART…
Archive size ~ 13.26 KB
-
host_peer_data_transfer
This example demonstrates how to send and receive raw binary data between a host device and a coprocessor without predefined message formats,…
Archive size ~ 5.72 KB
-
host_performs_slave_ota
This example demonstrates the **ESP-Hosted Transport OTA**, allowing the update of slave firmware through the existing ESP-Hosted connection…
Archive size ~ 36.98 KB
-
host_sdcard_with_hosted
This example demonstrates how to use an SD card on an ESP32-P4 dev board while ESP-Hosted communicates with an on-board ESP32-C6 via SDIO. It…
Archive size ~ 12.44 KB
-
host_shuts_down_slave_to_power_save
This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting it down when idle and waking it on demand. It…
Archive size ~ 7.28 KB
-
host_transport_config
This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It details default transport…
Archive size ~ 6.63 KB
-
host_wifi_easy_connect_dpp_enrollee
This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…
Archive size ~ 6.26 KB
-
host_wifi_itwt
This example shows how to use itwt of wifi, which only works in station mode and requires the AP to support itwt capability. It can operate under…
Archive size ~ 14.98 KB
-
slave
The ESP-Hosted MCU Slave Example demonstrates the firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs via ESP32 series co-…
Archive size ~ 487.39 KB