uploaded 1 day ago
ESP-Hosted-MCU provide drivers to act any ESP chipset as Wi-Fi or Bluetooth co-processor.
-
host_bluedroid_ble_compatibility_test
This example is designed to test Bluetooth compatibility with mobile phones, using the ESP32-P4 Dev Board as the BT Host connected to an ESP32 co-…
Archive size ~ 12.51 KB
-
host_bluedroid_bt_hid_mouse_device
This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…
Archive size ~ 10.70 KB
-
host_bluedroid_host_only
This example demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller. Modified from the bt_discovery example, it includes…
Archive size ~ 6.14 KB
-
host_bt_controller_mac_addr
This example demonstrates how to change the MAC Address for a BLE device identified as `Bluedroid_Beacon`. Running this example will allow you to see…
Archive size ~ 7.60 KB
-
host_gpio_expander
This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of the slave (co-processor) from the host MCU. It involves…
Archive size ~ 2.89 KB
-
host_hosted_cp_meminfo
This host example enables a memory monitor on the co-processor to track heap usage, allowing real-time queries, periodic reports, or threshold-based…
Archive size ~ 11.73 KB
-
host_hosted_events
This host example utilizes ESP-Hosted events to manage the connectivity with the co-processor. It can detect resets or hangs of the co-processor,…
Archive size ~ 11.68 KB
-
host_manage_copro_ext_coex
This host side example demonstrates the configuration and use of External Coexistence (EXT_COEX) in ESP-Hosted co-processor, allowing a host MCU to…
Archive size ~ 4.17 KB
-
host_network_split__power_save
This example demonstrates the integration of two advanced ESP-Hosted features: Network Split, which enables smart traffic routing between the host…
Archive size ~ 17.68 KB
-
host_nimble_bleprph_host_only_uart_hci
This example demonstrates a BLE Peripheral using UART transport on various ESP32 models, requiring custom transport configuration. It highlights…
Archive size ~ 501.02 KB
-
host_nimble_bleprph_host_only_vhci
This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller and default uart-transport to be…
Archive size ~ 13.26 KB
-
host_peer_data_transfer
This example demonstrates how to send and receive raw binary data between a host device and a coprocessor without predefined message formats,…
Archive size ~ 5.72 KB
-
host_performs_slave_ota
This example demonstrates ESP-Hosted Transport OTA, enabling firmware updates for a slave device through the existing ESP-Hosted connection…
Archive size ~ 36.98 KB
-
host_sdcard_with_hosted
This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted communicating via SDIO to the on-board ESP32-C6. It…
Archive size ~ 12.44 KB
-
host_shuts_down_slave_to_power_save
This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting it down when idle and waking it up on demand. The…
Archive size ~ 7.28 KB
-
host_transport_config
This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization, covering default configurations…
Archive size ~ 6.63 KB
-
host_wifi_easy_connect_dpp_enrollee
This example demonstrates how to configure ESP devices as an enrollee using Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect,…
Archive size ~ 6.26 KB
-
host_wifi_itwt
This example shows how to use itwt of wifi in station mode, which requires the Access Point to support itwt capability. Itwt can operate under…
Archive size ~ 14.98 KB
-
slave
The ESP-Hosted MCU Slave Example provides firmware for enabling Wi-Fi and Bluetooth connectivity to host MCUs using ESP32 co-processors via SDIO,…
Archive size ~ 487.39 KB