uploaded 6 hours ago
ESP-Hosted-MCU provide drivers to act any ESP chipset as Wi-Fi or Bluetooth co-processor.
-
host_bluedroid_ble_compatibility_test
This example tests Bluetooth compatibility using the ESP32-P4 Dev Board as the Bluetooth host, connected to an ESP32 co-processor via SPI FD. It has…
Archive size ~ 12.51 KB
-
host_bluedroid_bt_hid_mouse_device
This example demonstrates how to implement a Bluetooth HID mouse device using the Classic Bluetooth HID profile APIs. It shows how to periodically…
Archive size ~ 10.70 KB
-
host_bluedroid_host_only
This is a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller. The example runs on the ESP32-P4 Dev Board connected to an ESP32 using SPI…
Archive size ~ 6.14 KB
-
host_bt_controller_mac_addr
This example demonstrates how to change the MAC Address of a BLE device. When executed, it will appear as `Bluedroid_Beacon` with the assigned MAC…
Archive size ~ 7.47 KB
-
host_network_split__power_save
This example demonstrates the integration of two key ESP-Hosted features: Network Split and Host Deep Sleep. Network Split enables the host MCU to…
Archive size ~ 13.10 KB
-
host_nimble_bleprph_host_only_uart_hci
The BLE Peripheral Example demonstrates a custom UART transport for BLE communication using ESP32 and compatible co-processors. It guides users…
Archive size ~ 501.02 KB
-
host_nimble_bleprph_host_only_vhci
This example demonstrates the use of the Bluetooth Hosted HCI transport provided by ESP-Hosted. It requires disabling the Bluetooth controller and…
Archive size ~ 13.26 KB
-
host_performs_slave_ota
This example demonstrates ESP-Hosted Transport OTA, allowing slave firmware updates through the existing ESP-Hosted connection (SDIO/SPI/UART)…
Archive size ~ 31.40 KB
-
host_sdcard_with_hosted
This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO communication. It initializes Wi-Fi, mounts the…
Archive size ~ 12.44 KB
-
host_transport_config
This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It shows how to customize the…
Archive size ~ 6.63 KB
-
host_wifi_easy_connect_dpp_enrollee
This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…
Archive size ~ 6.26 KB
-
host_wifi_itwt
This example shows how to use ITWT (Individual Target Wake Time) of Wi-Fi, which operates in station mode and requires AP support. ITWT can function…
Archive size ~ 14.98 KB
-
slave
The ESP-Hosted MCU Slave Example demonstrates firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs using ESP32 series co-processors.…
Archive size ~ 444.71 KB