ChangeLog

v1.6.0 - 2025-01-13

Enhancements:

  • Update to the latest version of I2C driver

v1.5.0 - 2024-12-25

Enhancements:

  • Remove linear dimming, default to enabling curve dimming for all.

v1.4.0 - 2024-11-15

Enhancements:

  • Example adapted to ESP32-C5 chip

v1.3.3 - 2024-11-07

Bug Fixes:

  • Fixed the issue of low power output in CCT mode.

v1.3.2 - 2024-09-19

Enhancements:

  • Added CCT range check in precision mode

v1.3.1 - 2024-08-28

Bug Fixes:

  • Delete some conditional judgments and allow external input mix table

v1.3.0 - 2024-06-05

Enhancements:

  • Add precise color control capability.

v1.2.0 - 2024-05-22

Enhancements:

  • Add more printing to facilitate debugging
  • Refactor the KP18058 code to facilitate configuration by referring to the datasheet
  • The effect interface no longer supports actions with a period of 0ms

v1.1.5 - 2024-05-10

Improvement:

  • Add the configuration option to enable print very little log with ESP_LOGW.

v1.1.4 - 2024-05-07

Bug Fixes:

  • Reconfigure KP18052 parameters
  • When the IIC dimming gray scale data size is 0, skip sending the data and only send the address.

v1.1.3 - 2024-04-24

Bug Fixes:

  • Fix KP18058 chip current data range error

v1.1.2 - 2024-02-05

Bug Fixes:

  • fix(lightbulb): incorrect type.

v1.1.1 - 2024-02-04

Bug Fixes:

  • Add CCT data range check.
  • Fixed the issue of setting interrupt_forbidden to true but the effect is still interrupted.

v1.1.0 - 2024-01-30

Enhancements:

  • Added the conversion function of IIC current values to the enumeration values required by the driver.
  • Added driver layer parameter checking macro and allowed configuring the detail level of the output log through menuconfig.

v1.0.0 - 2024-01-16

Enhancements:

  • The driver provides LED bead combination options and supports different types of lightbulbs.
  • Added feature to count IIC driver transmission failures, aiding in hardware health monitoring.
  • Discontinued support for SM2135E driver, removing related files and code.
  • Updated BP5758D driver files to BP57X8D for consistency with SM2X35EGH.
  • The driver now supports setting white balance parameters for all channels. This means that you can adjust the white balance individually for each channel, allowing for precise control and customization of the lighting output.
  • Increased the power limit range from 100-300 to 100-500, facilitating power setting for RGBWW beads.
  • Introduced CCT output modes: standard mode (consistent with original scheme, mapping percentage to Kelvin values proportionally) and precise mode (setting individual percentages for each Kelvin value and predetermining current coefficients for each channel, scaling these coefficients proportionally during writing).
  • Some configuration changes:
    • Removed mode_mask from capability, now using led_beads to set the LED panel bead combination
    • Renamed enable_mix_cct to enable_hardware_cct, fades_ms to fade_time_ms, and enable_fades to enable_fade
    • Removed hardware_monitor_cb

v0.5.5 - 2024-01-15

Bug Fixes:

  • Update conditions for CI tests

v0.5.4 - 2024-01-12

Bug Fixes:

  • fix: stack overflow in task fade_tick_task on xtensa architecture

v0.5.3 - 2024-01-10

Bug Fixes:

  • fix: function declaration isn't a prototype [-Werror=strict-prototypes]

v0.5.2 - 2023-10-28

Enhancements:

  • Update LEDC low power code logic.
  • Modify the test cases and use the pytest tool for real hardware testing.

v0.5.1 - 2023-10-26

Bug Fixes:

  • Fix phase delay for pwm cw channel.

v0.5.0 - 2023-10-09

Enhancements:

  • Add a phase delay function to the PWM drive, and after enabling this function, all channel outputs will be in a complementary state.

v0.4.1 - 2023-8-30

Bug Fixes:

  • Fixed a thread safety issue.
  • Fixed fade direction being reversed.

v0.4.0 - 2023-7-10

Enhancements:

  • The PWM driver will update the timer resolution based on the incoming PWM frequency to accommodate a wider range of frequencies.
  • Remove the blocking check of the timer status in lightbulb_basic_effect_start to allow for subsequent calls within the callback.

v0.3.3 - 2023-7-04

Bug Fixes:

  • Fixed a compilation problem caused by a macro naming error.

v0.3.2 - 2023-6-02

Bug Fixes:

  • Fixed a thread safety issue

v0.3.1 - 2023-5-15

Enhancements:

  • Add an active flag to gptimer to reduce invalid error print in the IDF gptimer driver

Bug Fixes:

  • Fixed a wrong error on kelvin range

v0.3.0 - 2023-5-8

Enhancements:

  • Provide an option to use gptimer instead of esptimer to generate ticks for the fade process

Bug Fixes:

  • Fixed a wrong conversion on percentage_convert_to_kelvin

v0.2.2 - 2023-3-10

Bug Fixes:

  • Fixed some wrong data types
  • Provides configuration options for the iic task instead of hardcoding
  • Added null pointer judgment to effect timer

v0.2.1 - 2023-2-21

Bug Fixes:

  • Provide a workaround solution to temporarily solve the issue that LEDC hardware fade API calls are blocked Please read some description of the macro PWM_ENABLE_HW_FADE in Kconfig
  • Effect interrupt_forbidden flag will allow to set when total_ms == 0

v0.2.0 - 2023-2-8

Enhancements:

  • Add interrupt_forbidden flag in effect
  • Provide Yxy color model conversion function

Bug Fixes:

  • Fix nvs structure naming error

v0.1.0 - 2023-1-11

Enhancements:

  • Support running on ESP32-C6

Bug Fixes:

  • Fix kelvin 2 percentage
  • Fix effect timer time
  • Modify the logic of low power mode entry and exit

v0.0.9 - 2022-12-28

Enhancements:

  • Provide an effect timer

v0.0.8 - 2022-12-22

Enhancements:

  • Provide new application layer capability: enable/disable auto-open

v0.0.7 - 2022-12-15

Enhancements:

  • Support running on ESP32-H2

v0.0.6 - 2022-12-05

Enhancements:

  • Support running on ESP32-C2
  • Provide PWM signal invert

Bug Fixes:

  • Fix LEDC output is disabled after the software reset

v0.0.5 - 2022-12-02

Enhancements:

  • Support compiling with IDF 5.0

Bug Fixes:

  • Fix some drivers being power halved in white light mode
  • Fix some configuration errors in the demo

v0.0.4 - 2022-11-10

Enhancements:

  • Support BP1658CJ IIC dimming chip

v0.0.3 - 2022-10-26

Enhancements:

  • Support KP18058 IIC dimming chip

v0.0.2 - 2022-10-26

Enhancements:

  • Support running on ESP32-S3

Bug Fixes:

  • Fix API lightbulb_rgb2hsv conversion error
  • Update some typo
    • basis -> basic
    • mix -> min

v0.0.1 - 2022-8-29

Enhancements:

  • Initial version

  • The following dimming solutions are supported

    • PWM
      • RGB + CW
      • RGB + CCT/Brightness
    • IIC dimming IC
      • SM2135E
      • SM2135EH
      • SM2235EGH
      • SM2335EGH
      • BP5758/BP5758D/BP5768D
    • Single Line
      • WS2812
  • Support for power limit

  • Support for color calibration

  • Support for effect

    • Blink
    • Breathe
  • Support for application layer capability configuration

    • Status memory
    • Fade
    • Mix CCT
    • Low-power
    • Light mode select
    • Sync change

Links

Supports all targets

License: Apache-2.0

To add this component to your project, run:

idf.py add-dependency "espressif/lightbulb_driver^1.6.0"

or download archive

Stats

  • Archive size
    Archive size ~ 90.37 KB
  • Downloaded in total
    Downloaded in total 47.5k times
  • Downloaded this version
    This version: 18 times

Badge

espressif/lightbulb_driver version: 1.6.0
|