uploaded 10 months ago
I2C driver for LIS2DH12 imu sensor
readme
# Component: LIS2DH12
The LIS2DH12 is an ultra-low-power highperformance three-axis linear accelerometer belonging to the "femto" family with digital I2C/SPI serial interface standard output. The device may be configured to generate interrupt signals by detecting two independent inertial wake-up/free-fall events as well as by the position of the device itself.
## Add component to your project
Please use the component manager command `add-dependency` to add the `lis2dh12` to your project's dependency, during the `CMake` step the component will be downloaded automatically
```
idf.py add-dependency "espressif/lis2dh12=*"
```
## Example of LIS2DH12 usage
* This component will show you how to use I2C module read external i2c sensor data, here we use LIS2DH12, which is a 3-axis accelerometer.
* Pin assignment:
* master:
* GPIO2 is assigned as the data signal of i2c master port
* GPIO1 is assigned as the clock signal of i2c master port
* Connection:
* connect sda of sensor with GPIO1
* connect scl of sensor with GPIO2
* no need to add external pull-up resistors, driver will enable internal pull-up resistors.
Links
- Homepage
- Documentation
-
Repository
350117fb02941f9d0f3a2ccde53f8da108d2ee8a
- Issues
Supports all targets
License: Apache-2.0
To add this component to your project, run:
download archive
idf.py add-dependency "espressif/lis2dh12^0.2.0"
Stats
-
Archive size ~ 14.34 KB
-
Downloaded in total 3.3k times
-
This version: 49 times
Badge
