uploaded 2 hours ago
motion detect.
Readme
# Motion Detection Models ## Model Latency | Target | Input | Stride | Latency (ms) | FPS | |--------|-------|--------|--------------|-----| | ESP32-S3 | rgb888 1280x720 | 1 | 197.01 | 5.08 | | ESP32-S3 | rgb888 1280x720 | 2 | 60.68 | 16.48 | | ESP32-S3 | rgb888 640x360 | 1 | 49.26 | 20.30 | | ESP32-S3 | rgb888 640x360 | 2 | 15.18 | 65.88 | | ESP32-S31 | rgb888 1280x720 | 1 | 117.88 | 8.48 | | ESP32-S31 | rgb888 1280x720 | 2 | 38.41 | 26.03 | | ESP32-S31 | rgb888 640x360 | 1 | 29.48 | 33.93 | | ESP32-S31 | rgb888 640x360 | 2 | 9.61 | 104.11 | | ESP32-P4 | rgb888 1280x720 | 1 | 86.75 | 11.53 | | ESP32-P4 | rgb888 1280x720 | 2 | 26.51 | 37.72 | | ESP32-P4 | rgb888 640x360 | 1 | 21.68 | 46.12 | | ESP32-P4 | rgb888 640x360 | 2 | 6.63 | 150.81 | > [!NOTE] > - ESP32-S3: CPU 240 MHz, data cache 64 KB, octal PSRAM 80 MHz. ESP32-S31: CPU 320 MHz, PSRAM 250 MHz. ESP32-P4: CPU 400 MHz, L2 cache 256 KB, PSRAM 32 MB at 250 MHz, chips >= ECO5. > - Stride controls the spacing between detection points. A smaller stride provides more reliable detection but increases latency, while a larger stride reduces latency but may miss smaller movements. For details, see [`get_moving_point_number`](motion_detect.hpp).
Links
- Homepage
-
Repository
eb72563e6a4e61d2bbc0d46e4c79f2c9f816c3c6
- MIT
Supports all targets
To add this component to your project, run:
download archive
idf.py add-dependency "espressif/motion_detect^0.1.2"
Stats
-
Archive size ~ 3.49 KB
-
Downloaded in total 9 times
-
Weekly Downloads (All Versions)
-
This version: 0 times
Badge
