<!-- SPDX-License-Identifier: MIT --> # JC8012P4A1C touch polling This standalone ESP-IDF 6.1 example prints GSL3680 coordinates using the existing JC8012P4A1C wiring (SCL 8, SDA 7, reset 22, interrupt 21). It does not initialize the display, audio or SD card. No PSRAM is needed. Provide the board's normal touch power supply and I2C pull-ups. After publishing `guition/esp_lcd_touch_gsl3680` 0.1.0: ```bash idf.py set-target esp32p4 idf.py build ``` To test an unpublished package, add `override_path` to the main manifest's GSL dependency, using the location of an extracted component archive. The published example deliberately has no dependency on parent directories. When changing IDF versions or chips, remove the previous example build directory before running `set-target`; board-generated files are not used. The stock IDF 6.1 ESP32-P4 revision defaults apply. For an older P4 chip, select the appropriate revision family in menuconfig before building. Compilation does not prove correct coordinates on a new panel. The driver stores state per handle; call read/get sequentially for each handle.
To create a project from this example, run:
idf.py create-project-from-example "guition-jc/esp_lcd_touch_gsl3680=0.1.0:touch_polling"