# Basic ESP32-S31 KSDIY 4.3-inch 480x800 RGB in-cell display example. ```sh idf.py set-target esp32s31 idf.py -p PORT build flash monitor ``` Use ESP-IDF 6.1 or newer with ESP32-S31 support and PSRAM enabled. The included defaults are for the tested 16 MB flash / octal 250 MHz PSRAM board. Adjust flash/PSRAM settings for other hardware. See the component README for wiring. Displays a centered label; touch is initialized by the BSP.
To create a project from this example, run:
idf.py create-project-from-example "kevincoooool/ksdiy_s31_43_bsp=0.1.0:basic"