idf.py add-dependency "kodediy/esp_lcd_co5300"

    ESP_LOGI(TAG, "Initialize QSPI bus");
    const spi_bus_config_t buscfg = CO5300_PANEL_BUS_QSPI_CONFIG(EXAMPLE_PIN_NUM_LCD_PCLK,
                                                                                 EXAMPLE_PIN_NUM_LCD_DATA0,
                                                                                 EXAMPLE_PIN_NUM_LCD_DATA1,
                                                                                 EXAMPLE_PIN_NUM_LCD_DATA2,
                                                                                 EXAMPLE_PIN_NUM_LCD_DATA3,
                                                                                 EXAMPLE_LCD_H_RES * 80 * sizeof(uint16_t));
    ESP_ERROR_CHECK(spi_bus_initialize(EXAMPLE_LCD_HOST, &buscfg, SPI_DMA_CH_AUTO));

    ESP_LOGI(TAG, "Install panel IO");
    esp_lcd_panel_io_handle_t io_handle = NULL;
    const esp_lcd_panel_io_spi_config_t io_config = CO5300_PANEL_IO_QSPI_CONFIG(EXAMPLE_PIN_NUM_LCD_CS, callback, &callback_data);
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)EXAMPLE_LCD_HOST, &io_config, &io_handle));

/**
 * Uncomment these line if use custom initialization commands.
 * The array should be declared as static const and positioned outside the function.
 */
// static const co5300_lcd_init_cmd_t lcd_init_cmds[] = {
// //  {cmd, { data }, data_size, delay_ms}
//    {0xfe, (uint8_t []){0x00}, 0, 0},
//    {0xef, (uint8_t []){0x00}, 0, 0},
//    {0x80, (uint8_t []){0x11}, 1, 0},
//    {0x81, (uint8_t []){0x70}, 1, 0},
//     ...
// };

    ESP_LOGI(TAG, "Install CO5300 panel driver");
    esp_lcd_panel_handle_t panel_handle = NULL;
    co5300_vendor_config_t vendor_config = {
        // .init_cmds = lcd_init_cmds,         // Only useful when `use_external_init_cmds` is set to 1
        // .init_cmds_size = sizeof(lcd_init_cmds) / sizeof(co5300_lcd_init_cmd_t),
    };
    const esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = EXAMPLE_PIN_NUM_LCD_RST,
        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,     // Implemented by LCD command `36h`
        .bits_per_pixel = EXAMPLE_LCD_BIT_PER_PIXEL,    // Implemented by LCD command `3Ah` (16/18/24)
        .vendor_config = (void *)&vendor_config,
    };
    ESP_ERROR_CHECK(esp_lcd_new_panel_co5300(io_handle, &panel_config, &panel_handle));

    esp_lcd_panel_reset(panel_handle);
    esp_lcd_panel_init(panel_handle);
    esp_lcd_panel_disp_on_off(panel_handle, true);