acceleration_waveform_measurement

Example of the component plasmapper/pl_adxl355 v1.0.0

ADXL355 Acceleration Waveform Measurement Example

  1. SPI interface is initialized (host: HSPI_HOST, MOSI pin: 5, MISO pin: 18, SCLK pin: 19).
  2. ADXL355 is initialized (frequency: 10 MHz, CS pin: 21).
  3. Range is set to ±2 g.
  4. Measurement frequency is set to 4000 Hz.
  5. Measurement is enabled.
  6. 10 time points of X-, Y- and Z-axis accelerations are read from the FIFO and printed every 5 seconds.

To create a project from this example, run:

idf.py create-project-from-example "plasmapper/pl_adxl355=1.0.0:acceleration_waveform_measurement"

or download archive (~1.83 KB)