i2c_controller

Example of the component plasmapper/pl_i2c v1.0.3

# I2C Controller Example

1. I2C interface is initialized (port: 0, SDA pin: 5, SCL pin: 18, pull-up: enabled).
2. I2C controller is initialized (address: 1, frequency: 100 kHz).
3. 5 bytes are written to the target.
4. 5 bytes are read from the target.

To create a project from this example, run:

idf.py create-project-from-example "plasmapper/pl_i2c^1.0.3:i2c_controller"

or download archive (83 bytes)