wiznet/wsm_driver

16 examples

• dhcp_dns

  This document outlines the steps to test DHCP and DNS using an ESP32-S3 board connected to a WIZnet Ethernet chip.

  22.58 KB
• http

  This example demonstrates how to set up and test an HTTP server using an ESP32-S3 board with a WIZnet Ethernet chip.

  13.31 KB
• loopback

  This README details steps to set up and test the Loopback example on an ESP32-S3 board using a WIZnet Ethernet chip.

  11.62 KB
• mqtt

  This README provides instructions for testing an MQTT example using ESP32-S3 with a WIZnet Ethernet chip.

  18.87 KB
• netbios

  This example provides a self-contained NetBIOS name lookup script for testing with the ESP32-S3 board and WIZnet Ethernet chips.

  21.67 KB
• network_install

  This example is a bring-up/diagnostic check for the WIZnet Ethernet chip with the ESP32-S3 board, verifying network connectivity via a serial monitor.

  7.23 KB
• pppoe

  This README provides a guide to setting up and testing a PPPoE example using an ESP32-S3 board and W5500 chip.

  20.78 KB
• sntp

  This example demonstrates how to configure SNTP time synchronization using the WIZnet Ethernet chip with an ESP32-S3 board.

  12.62 KB
• tcp_client_over_ssl

  This example demonstrates how to set up a TCP client over SSL using the WIZnet Ethernet chip with an ESP32-S3 board.

  13.31 KB
• tcp_server_multi_socket

  This example demonstrates how to set up a TCP server using multiple sockets with the ESP32-S3 and WIZnet chip.

  12.82 KB
• tcp_server_over_ssl

  This example demonstrates setting up a TCP server over SSL using ESP32-S3 and WIZnet Ethernet chips.

  15.44 KB
• tftp

  This README outlines steps to test a TFTP example using the WIZnet Ethernet chip with the ESP32-S3 board, detailing software, hardware setup, and network configuration.

  19.55 KB
• udp

  This document provides instructions for preparing software and hardware for testing a UDP example using the ESP32-S3 and WIZnet chips.

  9.87 KB
• udp_multicast

  This README outlines the steps to set up and test a UDP Multicast example using the ESP32-S3 and WIZnet Ethernet chip.

  17.54 KB
• upnp

  This example demonstrates how to set up and test UPnP using the ESP32-S3 and WIZnet Ethernet chip for network configuration.

  26.83 KB
• w6300_loopback

  This README provides instructions for testing the W6300 Loopback example, covering software and hardware preparation, network configuration, and build steps.

  4.67 KB