esp_touch

| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |

# Bytebeam ESP Touch Example
This example demonnstrates how to push board capacitive touch GPIOs readings to Bytebeam IoT Platform.

## Hardware Required
- A development board with Espressif SoC (e.g.,ESP32-DevKitC, ESP-WROVER-KIT, etc.)
- A USB cable for Power supply and programming

## Software Required
- ESP-IDF
- Bytebeam ESP-IDF SDK

## Project Configurations

Open the project configuration menu (`idf.py menuconfig`).

In the `Example Configuration` menu:

- Set the Wi-Fi configuration.
  - Set `WiFi SSID`.
  - Set `WiFi Password`.

Optional: If you need, change the other options according to your requirements.

## Build and Flash

Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.

## Example Output

```
```

## Troubleshooting

- Ensure you've provisioned the device correctly
- Ensure working Wi-Fi connectivity

For any technical queries, please open an [issue](https://github.com/bytebeamio/bytebeam-esp-idf-sdk/issues) on GitHub. We will get back to you soon.