espressif/esp_hosted

17 examples

• host_bluedroid_ble_compatibility_test

  This example is designed to test Bluetooth compatibility using an ESP32-P4 Dev Board as the BT Host, connected to an ESP32 co-processor via GPIO and…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse that…

  10.70 KB
• host_bluedroid_host_only

  This example demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller. It is based on the modified bt_discovery example,…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC Address of a BLE device. When executed, a BLE Scanner will display a `Bluedroid_Beacon` device with…

  7.47 KB
• host_gpio_expander

  This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of the slave (co-processor) from the host MCU, allowing the host to…

  2.89 KB
• host_hosted_events

  This example demonstrates the use of ESP-Hosted events to detect when a co-processor resets or hangs, allowing the system to reinitialize ESP-Hosted…

  11.69 KB
• host_network_split__power_save

  This example demonstrates the integration of **Network Split** and **Host Deep Sleep** features in ESP-Hosted systems. It allows a host MCU to…

  17.43 KB
• host_nimble_bleprph_host_only_uart_hci

  This BLE Peripheral Example demonstrates the use of a custom UART transport application for ESP32 and similar MCUs. It provides a walkthrough on…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example demonstrates the Bluetooth Hosted HCI transport provided by ESP-Hosted for ESP32 devices. It disables the Bluetooth controller and UART…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing for maximum control over data…

  5.72 KB
• host_performs_slave_ota

  This example demonstrates **ESP-Hosted Transport OTA** for updating slave firmware through an existing connection (SDIO/SPI/UART) without needing…

  36.98 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO for communication with the ESP32-C6. It…

  12.44 KB
• host_shuts_down_slave_to_power_save

  This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting the slave down when idle and waking it up on…

  7.28 KB
• host_transport_config

  Demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization, showing how to get default transport…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect,…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt of wifi, which operates in station mode and requires the AP to support it. Itwt can work under different power…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example demonstrates firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs using ESP32 series co-processors…

  466.56 KB