uploaded 8 hours ago
ESP-Hosted-MCU provide drivers to act any ESP chipset as Wi-Fi or Bluetooth co-processor.
-
host_bluedroid_ble_compatibility_test
This example is designed to test Bluetooth compatibility with mobile phones, utilizing the ESP32-P4 Dev Board as the BT Host connected to an ESP32…
Archive size ~ 12.51 KB
-
host_bluedroid_bt_hid_mouse_device
This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile, simulating a Bluetooth HID mouse that…
Archive size ~ 10.70 KB
-
host_bluedroid_host_only
This is a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It supports ESP32-P4 Dev Board…
Archive size ~ 6.14 KB
-
host_bt_controller_mac_addr
This example demonstrates how to change the MAC Address of a BLE device, displaying it as `Bluedroid_Beacon`. Further modifications can be made to…
Archive size ~ 7.47 KB
-
host_gpio_expander
This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of a slave co-processor from the host MCU, allowing the host to…
Archive size ~ 2.89 KB
-
host_hosted_cp_meminfo
This host example allows for monitoring the heap usage on the ESP32 co-processor by enabling a memory monitor. Users can query heap usage at any…
Archive size ~ 11.73 KB
-
host_hosted_events
This example demonstrates how to use ESP-Hosted events to detect when a co-processor has reset or hung, taking necessary actions to reinitialize ESP-…
Archive size ~ 11.68 KB
-
host_manage_copro_ext_coex
This host-side example demonstrates how to configure and use External Coexistence (EXT_COEX) in ESP-Hosted co-processor, leveraging the Packet…
Archive size ~ 4.17 KB
-
host_network_split__power_save
This example demonstrates the combination of two key ESP-Hosted features: Network Split and Host Deep Sleep. It enables the host MCU to save energy…
Archive size ~ 17.68 KB
-
host_nimble_bleprph_host_only_uart_hci
This README provides an overview of the BLE Peripheral Example, which uses a UART transport written by the application. It includes instructions on…
Archive size ~ 501.02 KB
-
host_nimble_bleprph_host_only_vhci
This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted. To utilize the Hosted HCI transport, disable the Bluetooth controller…
Archive size ~ 13.26 KB
-
host_peer_data_transfer
This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing maximum control over data formats…
Archive size ~ 5.72 KB
-
host_performs_slave_ota
This example demonstrates ESP-Hosted Transport OTA, allowing updates to slave firmware through the existing ESP-Hosted connection (SDIO/SPI/UART)…
Archive size ~ 36.98 KB
-
host_sdcard_with_hosted
This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO for communication with the ESP32-C6. It…
Archive size ~ 12.44 KB
-
host_shuts_down_slave_to_power_save
This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting the slave down when idle and waking it up on…
Archive size ~ 7.28 KB
-
host_transport_config
This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It covers obtaining the default…
Archive size ~ 6.63 KB
-
host_wifi_easy_connect_dpp_enrollee
This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…
Archive size ~ 6.26 KB
-
host_wifi_itwt
This example shows how to use itwt of wifi, which only works in station mode and requires an AP that supports it. Itwt operates under different power…
Archive size ~ 14.98 KB
-
slave
The ESP-Hosted MCU Slave Example showcases firmware enabling host MCUs to access Wi-Fi and Bluetooth connectivity via ESP32 series co-processors…
Archive size ~ 487.03 KB