espressif/esp_hosted

22 examples

• host_bluedroid_ble_compatibility_test

  This example tests Bluetooth compatibility between mobile phones and ESP32 devices using hosted HCI transport.

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example shows how to implement a Bluetooth HID device simulating a mouse using Classic Bluetooth APIs.

  10.71 KB
• host_bluedroid_host_only

  This example demonstrates using ESP-Hosted as HCI IO for Bluetooth on ESP32, with SPI FD transport between devices.

  6.15 KB
• host_bt_controller_mac_addr

  This example shows how to change the MAC Address of a BLE device and initialize the Bluetooth Controller.

  7.62 KB
• host_gpio_expander

  This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of the slave from the host MCU.

  2.90 KB
• host_hosted_cp_meminfo

  This example enables a memory monitor on the co-processor to track heap usage, allowing the host to query memory usage or receive periodic reports.

  11.75 KB
• host_hosted_events

  This example utilizes ESP-Hosted events for detecting co-processor resets or hangs, ensuring restored connectivity.

  11.71 KB
• host_manage_copro_ext_coex

  This example shows how to configure External Coexistence (EXT_COEX) in ESP-Hosted co-processor, allowing host MCUs to manage Wi-Fi and external radio coexistence.

  4.54 KB
• host_network_split__power_save

  This example demonstrates the integration of Network Split and Host Deep Sleep features to optimize power usage, allowing a host MCU to remain inactive while a slave device maintains network connectivity.

  17.70 KB
• host_nimble_bleprph_host_only_uart_hci

  This example uses the UART transport to connect an ESP32-P4 to another ESP32 over UART for BLE communication.

  501.03 KB
• host_nimble_bleprph_host_only_vhci

  This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted for BLE communication.

  13.27 KB
• host_openthread_border_router

  This example demonstrates an OpenThread border router running on a Host Processor and communicating with an OpenThread RCP and Wi-Fi.

  8.65 KB
• host_openthread_cli

  This example demonstrates an OpenThread CLI with additional features, running on an ESP32-P4 and ESP32-C6 co-processor.

  8.39 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host and a coprocessor, ideal for peer-to-peer applications.

  6.43 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA for updating slave firmware through an existing ESP-Hosted connection without extra hardware.

  37.04 KB
• host_sdcard_with_hosted

  This example demonstrates using an SD card on an ESP32-P4 with ESP-Hosted using SDIO, providing file operations and Wi-Fi scanning.

  12.46 KB
• host_shuts_down_slave_to_power_save

  This example demonstrates host-side control of an ESP slave to reduce power by shutting it down when idle.

  7.30 KB
• host_transport_config

  Demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization.

  6.66 KB
• host_wifi_easy_connect_dpp_enrollee

  This example shows how to configure ESP devices as an enrollee using Device Provisioning Protocol (DPP) for network onboarding.

  6.28 KB
• host_wifi_itwt

  This example shows how to use itwt of wifi, which works in station mode with AP support.

  14.99 KB
• host_zigbee_thermostat

  This example demonstrates how to configure a Home Automation thermostat on a Zigbee Coordinator.

  14.60 KB
• slave

  The ESP-Hosted MCU Slave Example demonstrates firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs via ESP32 series co-processors.

  498.27 KB