espressif/esp_hosted

19 examples

• host_bluedroid_ble_compatibility_test

  This example is to test the Bluetooth compatibility and mobile phones, modified to work with ESP-Hosted. It runs on the ESP32-P4 Dev Board as the BT…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…

  10.70 KB
• host_bluedroid_host_only

  This example demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It supports ESP32…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC address for a BLE device, showing a `Bluedroid_Beacon` device when run. For further details, refer to…

  7.60 KB
• host_gpio_expander

  This example demonstrates how to use the ESP-Hosted solution to control the GPIOs of the slave (co-processor) from the host MCU, allowing the host to…

  2.89 KB
• host_hosted_cp_meminfo

  This host example enables a memory monitor on the ESP32 co-processor, allowing the host to query heap usage, receive periodic memory reports, or…

  11.73 KB
• host_hosted_events

  This example demonstrates the use of ESP-Hosted events to detect when a co-processor has reset or hung, enabling the reinitialization of ESP-Hosted…

  11.68 KB
• host_manage_copro_ext_coex

  This host side example demonstrates how to configure and use External Coexistence (EXT_COEX) in ESP-Hosted co-processor. The ESP co-processor manages…

  4.17 KB
• host_network_split__power_save

  This example demonstrates the integration of **Network Split** and **Host Deep Sleep** features in ESP-Hosted systems, enabling the host MCU to save…

  17.68 KB
• host_nimble_bleprph_host_only_uart_hci

  This example utilizes UART transport created by the application itself, demonstrating how to connect ESP32-P4 with another ESP32 over UART. It…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller to be disabled and the default UART…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor without predefined message formats,…

  5.72 KB
• host_performs_slave_ota

  This example demonstrates the **ESP-Hosted Transport OTA**, allowing the update of slave firmware through the existing ESP-Hosted connection…

  36.98 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board while ESP-Hosted communicates with an on-board ESP32-C6 via SDIO. It…

  12.44 KB
• host_shuts_down_slave_to_power_save

  This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting it down when idle and waking it on demand. It…

  7.28 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It details default transport…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt of wifi, which only works in station mode and requires the AP to support itwt capability. It can operate under…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example demonstrates the firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs via ESP32 series co-…

  487.39 KB