espressif/esp_hosted

14 examples

• host_bluedroid_ble_compatibility_test

  This example tests Bluetooth compatibility using the ESP32-P4 Dev Board as a BT Host connected to an ESP32 co-processor. It is modified to work with…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…

  10.70 KB
• host_bluedroid_host_only

  This README describes a Bluetooth Host implementation using ESP-Hosted as HCI IO for the ESP32 platform. The provided example showcases modifications…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC Address for a Bluetooth controller, allowing a BLE Scanner to recognize a device named…

  7.47 KB
• host_network_split__power_save

  This example demonstrates the integration of **Network Split** and **Host Deep Sleep** features to enhance power efficiency in ESP-Hosted systems. It…

  13.21 KB
• host_nimble_bleprph_host_only_uart_hci

  This example uses the UART transport implemented by the application itself to demonstrate BLE peripheral operation with ESP32 devices. It includes…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example demonstrates the Bluetooth Hosted HCI transport provided by ESP-Hosted. It involves configuring the application to disable the Bluetooth…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing maximum control over data formats…

  5.73 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA, which updates slave firmware through an existing ESP-Hosted connection (SDIO/SPI/UART) without…

  31.38 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted communicating via SDIO with an ESP32-C6. It initializes ESP-…

  12.44 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It showcases getting the default…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use the itwt feature of WiFi in station mode, requiring the AP to support it. The example supports various power save…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example demonstrates firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs via ESP32 series co-processors. It…

  457.26 KB