espressif/esp_hosted

14 examples

• host_bluedroid_ble_compatibility_test

  This example is designed to test Bluetooth compatibility between mobile phones and ESP32-based devices. It utilizes the ESP32-P4 Dev Board as the BT…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile. It simulates a Bluetooth HID mouse that…

  10.70 KB
• host_bluedroid_host_only

  This example demonstrates a Bluetooth Host utilizing ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It supports…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC Address for a BLE Scanner, allowing the device to appear as `Bluedroid_Beacon` with the assigned MAC…

  7.47 KB
• host_network_split__power_save

  This example demonstrates the integration of **Network Split** and **Host Deep Sleep** features in ESP-Hosted, allowing a host MCU to save power…

  17.42 KB
• host_nimble_bleprph_host_only_uart_hci

  This example provides a setup for using BLE (Bluetooth Low Energy) peripheral functionalities with UART transport on ESP32-based microcontrollers.…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example demonstrates the use of Bluetooth Hosted HCI transport provided by ESP-Hosted on ESP32 devices. It requires disabling the Bluetooth…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing for a flexible, direct…

  5.73 KB
• host_performs_slave_ota

  This example demonstrates **ESP-Hosted Transport OTA** - updating slave firmware **through the existing ESP-Hosted connection** (SDIO/SPI/UART)…

  31.38 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted utilizing SDIO to communicate with the onboard ESP32-C6. It…

  12.44 KB
• host_transport_config

  Demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It shows how to get default transport…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt (implicit TWT) of WiFi, which operates in station mode with an AP that supports this capability. Itwt functions…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example demonstrates firmware that provides Wi-Fi and Bluetooth connectivity to host MCUs via ESP32 series co-processors. It…

  457.80 KB