espressif/esp_hosted

14 examples

• host_bluedroid_ble_compatibility_test

  This example tests Bluetooth compatibility between the ESP32-P4 Dev Board acting as the BT Host and an ESP32 co-processor using SPI FD for Hosted HCI…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs, simulating a Bluetooth HID mouse that…

  10.70 KB
• host_bluedroid_host_only

  This project demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller, modified from the bt_discovery example. It enables the…

  6.14 KB
• host_bt_controller_mac_addr

  This example shows how to change the MAC Address of a BLE device, which will appear as `Bluedroid_Beacon` in a BLE Scanner. It can be configured to…

  7.47 KB
• host_network_split__power_save

  This example demonstrates the integration of Network Split and Host Deep Sleep features in ESP-Hosted applications, allowing the host MCU to conserve…

  17.42 KB
• host_nimble_bleprph_host_only_uart_hci

  This example demonstrates using a custom UART transport for BLE peripheral applications, specifically between an ESP32-P4 and another ESP32. It…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller to be disabled and the default uart-…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing for maximum control over data…

  5.73 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA, updating slave firmware through the existing ESP-Hosted connection (SDIO/SPI/UART) without any…

  36.98 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO to communicate with an on-board ESP32-C6. It…

  12.44 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization, showing customization options for…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as enrollees using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect,…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt of Wi-Fi, which only operates in station mode and requires the AP to support it. The example includes details on…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example showcases the slave firmware that enables host MCUs to utilize Wi-Fi and Bluetooth capabilities of ESP32 series…

  457.80 KB