espressif/esp_hosted

16 examples

• host_bluedroid_ble_compatibility_test

  This example tests Bluetooth compatibility and mobile phone connectivity using the ESP32-P4 Dev Board as a BT Host connected to an ESP32 co-processor…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…

  10.70 KB
• host_bluedroid_host_only

  This project implements a Bluetooth Host using ESP-Hosted as HCI IO to the Bluetooth Controller. It is based on a modified example of bt_discovery…

  6.14 KB
• host_bt_controller_mac_addr

  This example shows how to change the MAC Address of a BLE device, which will appear as `Bluedroid_Beacon` with the assigned MAC address when run.…

  7.47 KB
• host_hosted_events

  This example demonstrates the use of ESP-Hosted events to detect when the co-processor has reset or hung, initiating reinitialization to restore…

  11.69 KB
• host_network_split__power_save

  This example demonstrates how to implement **Network Split** and **Host Deep Sleep** with ESP-Hosted features, enabling a host MCU to save power…

  17.43 KB
• host_nimble_bleprph_host_only_uart_hci

  This example demonstrates a BLE Peripheral application using UART transport created by the user. It requires disabling the default UART transport and…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example utilizes the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller to be disabled and uart-transport…

  13.26 KB
• host_peer_data_transfer

  This example demonstrates how to send and receive raw binary data between a host device and a coprocessor, allowing for maximum control over data…

  5.73 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA, enabling updates to slave firmware via an existing ESP-Hosted connection (SDIO/SPI/UART) without…

  36.98 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted communicating via SDIO to the on-board ESP32-C6. It…

  12.44 KB
• host_shuts_down_slave_to_power_save

  This example demonstrates host-side control of an ESP slave to reduce power consumption by shutting the slave down when idle and waking it up on…

  7.28 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization, showcasing default transport…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use itwt (implicit Timed WiFi Transmission) of Wi-Fi, which operates in station mode with AP support. Itwt functions in…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example showcases firmware that allows host MCUs to leverage Wi-Fi and Bluetooth capabilities of ESP32 series chips via…

  458.49 KB