> :warning: This is **No Graphical Library version** of m5stack_core_2 BSP. If you want to use this BSP with LVGL use [m5stack_core_2](https://components.espressif.com/components/espressif/m5stack_core_2) component. # BSP: M5Stack Core2 | [HW Reference](https://docs.m5stack.com/en/core/Core2) | [HOW TO USE API](API.md) | [EXAMPLES](#compatible-bsp-examples) | [](https://components.espressif.com/components/espressif/m5stack_core_2) |  | | --- | --- | --- | --- | -- | > [!WARNING] > The SD card is not working simultaneously with the LCD screen. We are working on a fix. ## Overview <table> <tr><td> M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. It is a powerful and user-friendly development board with the following features: - **MCU**: Equipped with an ESP32-D0WDQ6-V3, featuring dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. - **Memory**: Onboard 16MB Flash and 8MB PSRAM. - **Interface**: USB TYPE-C interface for charging, program downloading, and serial communication. - **Display**: 2.0-inch integrated capacitive touch screen with three programmable capacitive buttons on the front. - **Power Management:** Managed by an AXP192 power management chip (upgraded to AXP2101 in Core2 V1.1), which effectively controls power consumption. It includes a built-in green LED power indicator for battery level notification. The battery capacity is 390mAh, providing longer power duration than the previous model. - For Core2 V1.0: Configure `CONFIG_BSP_PMU_AXP192` - For Core2 V1.1: Configure `CONFIG_BSP_PMU_AXP2101` - **Audio**: I2S digital audio interface power amplifier chip to prevent signal distortion, along with a built-in speaker. - **Expansion**: Retains a TF-card (microSD) slot, and an expansion board on the back with a 6-axis IMU sensor and a microphone. - **RTC Module**: Built-in RTC module for accurate timing, with a dedicated battery for RTC power supply in Core2 V1.1. Additional Features: Built-in vibration motor for haptic feedback, independent power, and reset buttons on the left side and bottom of the base. </td><td width="200" valign="top"> <img src="doc/m5stack_core_2.webp"> </td></tr> </table> <p align="center"> <img src="https://static-cdn.m5stack.com/resource/docs/products/core/core2/core2_01.webp" alt="basic" width="350" height="350"><img src="https://static-cdn.m5stack.com/resource/docs/products/core/Core2%20v1.1/img-1a949091-da2c-4fbb-bf4f-bce108cb43ec.webp" alt="gray" width="350" height="350"> </p> #### Core2 V1.1 Enhancements Core2 V1.1 is an iterative version of Core2 with the following upgrades and additional features: - **Power Management**: Uses the AXP2101 power management chip for enhanced power control. - **Indicators**: Built-in blue power indicator light for specific functions or status indications. - RTC Battery: Dedicated battery for RTC power supply for accurate timing. - **User Interaction**: Enhanced touch screen experience with programmable virtual buttons for diverse human-machine interaction. ## Capabilities and dependencies <div align="center"> <!-- START_DEPENDENCIES --> | Available | Capability |Controller/Codec| Component | Version | |------------------|------------------------|----------------|------------------------------------------------------------------------------------------------------------|------------| |:heavy_check_mark:| :pager: DISPLAY | ili9341 | [espressif/esp_lcd_ili9341](https://components.espressif.com/components/espressif/esp_lcd_ili9341)<br/>idf |^1<br/>>=5.0| |:heavy_check_mark:|:black_circle: LVGL_PORT| | | | |:heavy_check_mark:| :point_up: TOUCH | ft5x06 |[espressif/esp_lcd_touch_ft5x06](https://components.espressif.com/components/espressif/esp_lcd_touch_ft5x06)| ^1 | | :x: | :radio_button: BUTTONS | | | | |:heavy_check_mark:| :musical_note: AUDIO | | [espressif/esp_codec_dev](https://components.espressif.com/components/espressif/esp_codec_dev) | ~1.1 | |:heavy_check_mark:| :speaker: AUDIO_SPEAKER| | | | | :x: | :microphone: AUDIO_MIC | | | | |:heavy_check_mark:| :floppy_disk: SDCARD | | idf | >=5.0 | | :x: | :video_game: IMU | | | | <!-- END_DEPENDENCIES --> </div> ## Compatible BSP Examples <div align="center"> <!-- START_EXAMPLES --> | Example | Description | Try with ESP Launchpad | | ------- | ----------- | ---------------------- | | [Display Example](https://github.com/espressif/esp-bsp/tree/master/examples/display) | Show an image on the screen with a simple startup animation (LVGL) | [Flash Example](https://espressif.github.io/esp-launchpad/?flashConfigURL=https://espressif.github.io/esp-bsp/config.toml&app=display) | | [Display, Audio and Photo Example](https://github.com/espressif/esp-bsp/tree/master/examples/display_audio_photo) | Complex demo: browse files from filesystem and play/display JPEG, WAV, or TXT files (LVGL) | [Flash Example](https://espressif.github.io/esp-launchpad/?flashConfigURL=https://espressif.github.io/esp-bsp/config.toml&app=display_audio_photo) | <!-- END_EXAMPLES --> </div> <!-- START_BENCHMARK --> <!-- END_BENCHMARK -->
idf.py add-dependency "espressif/m5stack_core_2_noglib^2.0.0~3"