uploaded 1 week ago
A lite version Wi-Fi Mesh, each node can access the network over the IP layer.

readme

# ESP-Mesh-Lite Component

[![Component Registry](https://components.espressif.com/components/espressif/mesh_lite/badge.svg)](https://components.espressif.com/components/espressif/mesh_lite)

- [User Guide](https://github.com/espressif/esp-mesh-lite/tree/master/components/mesh_lite/User_Guide.md)

ESP-MESH-LITE is a Wi-Fi networking application of [IoT-Bridge](https://github.com/espressif/esp-iot-bridge), based on the **SoftAP + Station** mode, a set of Mesh solutions built on top of the Wi-Fi protocol. ESP-MESH-LITE allows numerous devices (henceforth referred to as nodes) spread over a large physical area (both indoors and outdoors) to be interconnected under a single WLAN (Wireless Local-Area Network). The biggest difference between ESP-MESH-LITE and [ESP-MESH](https://docs.espressif.com/projects/esp-idf/en/v5.0/esp32/api-guides/esp-wifi-mesh.html) (also known as ESP-WIFI-MESH) is that ESP-MESH-LITE allows sub-devices in the network to independently access the external network, and the transmission information is insensitive to the parent node, which greatly reduces the difficulty to develop the application layer. ESP-MESH-LITE is self-organizing and self-healing, which means the network can be built and maintained autonomously.

## Feature

- Support self-healing of the mesh network
- Support establishing mesh network by root node even if no router is connected
- Support automatically joining the mesh network without configuring router information
- Support setting node only as root node
- Support setting node only as non-root node
- Support setting whether the mesh network is allowed to join
- Support checking whether the joined devices are legal
- Support root node to communicate with child nodes
  - Child node sends broadcast message to parent node
  - Child node sends message to root node
  - Child node sends message to parent node
  - Parent node sends broadcast message to child nodes
- Support encryption of data communication between mesh network

## API

- The application layer only needs to call this API at the code level to enable Mesh-Lite.

	```
    esp_bridge_create_all_netif();

    esp_mesh_lite_config_t mesh_lite_config = ESP_MESH_LITE_DEFAULT_INIT();
    esp_mesh_lite_init(&mesh_lite_config);

    esp_mesh_lite_start();
	```

## Add component to your project
Please use the component manager command `add-dependency` to add the `mesh_lite` to your project's dependency, during the CMake step the component will be downloaded automatically.

```
idf.py add-dependency "espressif/mesh_lite=*"
```

## Examples

Please use the component manager command `create-project-from-example` to create the project from example template.

```
idf.py create-project-from-example "espressif/mesh_lite=*:mesh_local_control"
```

Then the example will be downloaded in current folder, you can check into it for build and flash.

> Or you can download examples from `esp-mesh-lite` repository: [mesh_local_control](https://github.com/espressif/esp-mesh-lite/tree/master/examples/mesh_local_control)

## Q&A

Q1. I encountered the following problems when using the package manager

```
Executing action: create-project-from-example
CMakeLists.txt not found in project directory /home/username
```

A1. This is because an older version packege manager was used, please run `pip install -U idf-component-manager` in ESP-IDF environment to update.

Q2. When Mesh-Lite is working, I call the `esp_wifi_scan_start` interface but it does not work.

A2. Because Mesh-Lite also has scan operations inside, it is recommended to use the `esp_mesh_lite_wifi_scan_start()` interface to scan. To call the scan interface externally, there needs to be a flag in the scan_done cb to control whether it is an externally called scan. If it is not an externally called scan, do not enter the external scan_done cb for processing.

```
if (esp_mesh_lite_wifi_scan_start(NULL, 3000 / TICK_MS) == ESP_OK) {
   scan_flag = true;
}
```

changelog

- [中文版本](https://github.com/espressif/esp-mesh-lite/blob/master/components/mesh_lite/CHANGELOG_CN.md)

# ChangeLog

## v0.10.2 - 2024-4-8

### 功能:

#### Mesh

- Add status fail event to monitor some abnormal state ([4b10eee](https://github.com/espressif/esp-mesh-lite/commit/4b10eee7bd76598f8093913672374ba97f9fd68b))
- Control the output of certain debug logs. ([4b10eee](https://github.com/espressif/esp-mesh-lite/commit/4b10eee7bd76598f8093913672374ba97f9fd68b))
- Support set softap network segment ([4b10eee](https://github.com/espressif/esp-mesh-lite/commit/4b10eee7bd76598f8093913672374ba97f9fd68b))
- Support for transferring custom files via the Mesh Lite LAN OTA interface ([bffbdf9](https://github.com/espressif/esp-mesh-lite/commit/bffbdf9297163ffd97b1996bde9c01c5247f5716))
- Limit the maximum level to 15 ([c262be5](https://github.com/espressif/esp-mesh-lite/commit/c262be5f8dc2acfd75e89959e3d493c18e3069d2))
- If the mesh ID is set and it does not match the current mesh ID, disconnect and search for a new parent node ([c262be5](https://github.com/espressif/esp-mesh-lite/commit/c262be5f8dc2acfd75e89959e3d493c18e3069d2))
- Workaround: Sometimes there is no Wi-Fi event when connecting AP which will cause mesh-lite does not work ([576fda94](https://github.com/espressif/esp-mesh-lite/commit/576fda945366f43656edc328654e89b09b5bf9a3))
- Support the registration of mesh lite scan cb ([576fda94](https://github.com/espressif/esp-mesh-lite/commit/576fda945366f43656edc328654e89b09b5bf9a3))
- support custom setting min rssi threshold when connecting router ([262920b](https://github.com/espressif/esp-mesh-lite/commit/262920bc614cb4e089a01447af1ffa020e9c113a))
- Support custom setting of rssi threshold during fusion ([ac502e19](https://github.com/espressif/esp-mesh-lite/commit/ac502e19347fb6e33a8e2462b102725505599206))
- Support the fusion of root nodes with rssi below the threshold in router mode ([ac502e19](https://github.com/espressif/esp-mesh-lite/commit/ac502e19347fb6e33a8e2462b102725505599206))
- Support custom setting of minimum rssi threshold for device selection of parent node ([ac502e19](https://github.com/espressif/esp-mesh-lite/commit/ac502e19347fb6e33a8e2462b102725505599206))

#### Bugfix

- Resolve fusion failure issue for root node devices in certain special scenarios ([4b10eee](https://github.com/espressif/esp-mesh-lite/commit/4b10eee7bd76598f8093913672374ba97f9fd68b))
- Fixed esp_mesh_lite_get_ssid_by_mac_cb_t doesn't really work ([262920b](https://github.com/espressif/esp-mesh-lite/commit/262920bc614cb4e089a01447af1ffa020e9c113a))
- Fixed device selection of a node that has reached the highest level when searching for a parent node ([ac502e19](https://github.com/espressif/esp-mesh-lite/commit/ac502e19347fb6e33a8e2462b102725505599206))

## v0.10.1 - 2024-3-5

### Enhancements:

#### Mesh

- Add lan ota rejected event
- Support set fusion config

#### Bugfix

- Fix memory leak when max_retry of esp_mesh_lite_try_sending_msg is 0
- Fix unable cancel the allowed and disallowed level
- Increase the compatibility of the temporary fixed version of hidden ssid
- Fix failed to take effect when setting allowed level and disallowed level

## v0.10.0 - 2024-1-9

### Enhancements:

#### Bugfix

- Fix the issue where users accidentally pass an empty SSID or stop Wi-Fi, causing internal scanning to fail and not recover
- Fix the issue of network failure when the SoftAP SSID is hidden.
- Fix the issue of incorrect hierarchy display when the network topology is restored.

## v0.9.2 - 2024-1-3

### Enhancements:

#### Mesh

- Support set leaf node softap status
- Support customizing the signal strength threshold during scanning for parent nodes
- Support set networking mode(Mesh mode or Router mode, default Mesh mode)

#### Bugfix

- Fixed send msg to root fail when softap ssid is different

## v0.9.1 - 2023-12-13

### Enhancements:

#### Mesh

- Support controlling mesh_lite internal log output color
- Support whitelist verification during networking

#### Bugfix

- Fixed the problem of slow network recovery after the root node goes offline

## v0.9.0 - 2023-10-31

### Enhancements:

#### Mesh

- Added a "max node number" configuration option.
- Add LAN OTA progress reporting
- When setting the allowed level and disallowed level, it will automatically check whether it conflicts with the current level. If it conflicts, the station will be disconnected and the new parent node will be searched again.
- Fixed leaf nodes being connected by other child nodes.
- Add processing of root nodes with the same signal strength during fusion

#### Bugfix

- Fixed the issue where nodes failed to reconnect to their original parent node after a soft restart
- Resolved the communication error prompt problem in the "no_router" example

## v0.8.0 - 2023-9-19

### Enhancements:

#### Supported ESP-IDF Version

- Add v5.1

#### Supported Socs

- ESP32-C6

## v0.7.0 - 2023-9-4

### Enhancements:

#### Mesh

- feat: Add esp_mesh_lite_start API
- chore(LAN OTA): After LAN OTA is successful, the call of esp_restart is placed outside lib

#### Bugfix

- fix: Fix the memory leak when the network is abnormal

## v0.6.0 - 2023-8-29

### Enhancements:

#### Mesh

- feat: Remove end_with_mac field to accommodate various types of suffixes.

#### Bugfix

- fix: child node cannot join mesh when root disconnect the router

## v0.5.0 - 2023-8-3

### Enhancements:

#### Mesh

- feat: Add join mesh without configured wifi.
- feat: Optimization for the "no_router" scenario.
- feat: Adapted to the new Nova Home APP and improved group control functionality.

#### Bugfix

- fix: circular recovery issue caused by hard reboot

#### Docs

- feat: update image url

## v0.4.0 - 2023-7-12

### Enhancements:

#### Mesh

- feat: Added event posting for OTA failure and success.

#### Bugfix

- fix: When multiple root nodes are far apart and unable to discover each other, they will continuously disconnect and reconnect to the router.
- fix: During the LAN OTA upgrade process, it suddenly paused.
- fix: LAN OTA upgrade failed.

## v0.3.0 - 2023-6-30

### Enhancements:

#### Mesh

- refactor: add wifi_scan_config param for esp_mesh_lite_wifi_scan_start
- chore: Open APIs to allow external access to router information and root SoftAP IP addr
- feat: Support manually specifying a device as a leaf node.

#### Bugfix

- Disable PMF in the Demo example.
- Remove `CONFIG_LWIP_IPV6=n` to resolve the compilation issue of rainmaker/led_light.
- Optimize the mesh_local_control example to resolve the problem of socket connect blocking the event task.

## v0.2.0 - 2023-6-5

### Enhancements:

#### Mesh

- Check if the level exceeds the maximum level when level changes

#### Supported Socs

- ESP32-C2

#### Bugfix

- API compatible with idf5.x and idf4.x versions
- Update documentation to fix links not jumping correctly
- Compile error when MESH_LITE_ENABLE is n

## v0.1.2 - 2023-3-26

### Enhancements:

#### Supported ESP-IDF Version

- Add v4.3

## v0.1.1 - 2023-3-1

### Enhancements:

- Adapt to iot_bridge(0.*) component.

## v0.1.0 - 2023-2-7

This is the first released version for mesh-lite component, more detailed descriptions about the project, please refer to [ESP-MESH-LITE](https://github.com/espressif/esp-mesh-lite/blob/master/components/mesh_lite/User_Guide.md).

### Enhancements:

#### Mesh

- Support self-healing of the mesh network
- Support establishing mesh network by root node even if no router is connected
- Support automatically joining the mesh network without configuring router information
- Support setting node only as root node
- Support setting node only as non-root node
- Support setting whether the mesh network is allowed to join
- Support checking whether the joined devices are legal
- Support root node to communicate with child nodes
  - Child node sends broadcast message to parent node
  - Child node sends message to root node
  - Child node sends message to parent node
  - Parent node sends broadcast message to child nodes
- Support encryption of data communication between mesh network
- Support OTA upgrade within the mesh network

#### Supported Socs

- ESP32
- ESP32-C3
- ESP32-S2
- ESP32-S3

#### Supported ESP-IDF Version

- v4.4
- v5.0

readme of led_light example

                                        
                                        - [中文版本](https://github.com/espressif/esp-mesh-lite/blob/master/examples/rainmaker/led_light/README_CN.md)

| Supported Targets | ESP32 | ESP32-C3 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- |

# LED Light Example(Nova Home)

This example uses the [Rainmaker cloud platform](https://rainmaker.espressif.com) to demonstrate the ESP-Mesh-Lite function. User can configure the device through the `Nova Home` APP and successfully connect to the Rainmaker cloud. The device is connected to the cloud based on Rainmaker, It can also provide other devices with the ability to surf the Internet wirelessly, and form a network with the Mesh-Lite function, which greatly reduces the load on the router and expands the wireless communication range.

## Get Start

### 1. Apps

- [Google PlayStore](https://play.google.com/store/apps/details?id=com.espressif.novahome)
- [Apple App Store](https://apps.apple.com/us/app/nova-home/id1563728960)

### 2. Get Key

Currently, there are two ways for a device to obtain a certificate:

- Self Claiming: After the network is configured, the device directly sends an http request to pull the certificate from the server, which can only be applied on **ESP32-S3** and **ESP32-C3**. Due to the binding with the MAC, the certificate pulled by each device is the same each time.
- Assisted Claiming: When configuring the network, the mobile APP requests a certificate from the server, and then sends it to the device through Bluetooth. It is not bound to the MAC. By default, an account has a limit of 5 applications.

Currently, ESP32-S3 and ESP32-C3 use Self-Claiming to obtain certificates by default, while ESP32 can only use Assisted Claiming to obtain certificates.

> Nova Home's Assisted Claiming method is currently unstable. If you use ESP32 to obtain a certificate, it is recommended to use the [ESP Rainmaker](https://github.com/espressif/esp-rainmaker#phone-apps) APP for Claiming

### 3. IDF environment setup & SDK

Refer to [README](https://github.com/espressif/esp-iot-bridge/blob/master/components/iot_bridge/User_Guide.md#3-set-up-development-environment)

### 4. Mesh-Lite function

- You can choose whether to enable the Mesh-Lite function in the menuconfig `Component config → ESP Wi-Fi Mesh Lite`. This example enables this function by default.
- If the Mesh-Lite function is enabled, the first networked device will connect to the target router and serve as the root node, and subsequent devices will be connected to the root node device and act as child nodes to form a Mesh-Lite network. For details, please refer to [Mesh-Lite](https://github.com/espressif/esp-mesh-lite/blob/master/components/mesh_lite/User_Guide.md).

### 5. Build & Flash

After the ESP-IDF environment is successfully set up, you can execute the following commands to compile and burn the firmware.

```
$ cd esp-mesh-lite/examples/rainmaker/led_light
$ idf.py set-target esp32c3
$ idf.py build
$ idf.py flash
```

### 6. Operation Steps

#### 6.1 Add Root Node

- Open the Nova Home app,The app will automatically discover the devices ready for network configuration.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/find_devices.jpg" alt="find_devices" width="25%" div align=center />

- Select one of the devices from the list.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/select_root_node.png" alt="select_root_node" width="25%" div align=center />

- Enter the network configuration details to proceed with the setup.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/select_network.jpg" alt="select_network" width="25%" div align=center />

- After successful network configuration, the device will be added to the app.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/root_done.png" alt="img" width="25%" div align=center />

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/root_device_of_common.png" alt="root_device_of_common" width="25%" div align=center />

- Page of the Device in the Mesh (Mesh ID is 117)

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/root_device_of_mesh.png" alt="root_device_of_mesh" width="25%" div align=center />

#### 6.2 Add child node

- On the Mesh page of the root node, click the plus icon in the upper-right corner.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/mesh_page.png" alt="mesh_page" width="25%" div align=center />

- Choose the child node device you want to add to the network.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/select_child_devices.jpg" alt="select_child_devices" width="25%" div align=center />

- Enter the network configuration details (same as the router's), and proceed with the setup.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/select_network.jpg" alt="select_network" width="25%" div align=center />

- Network configuration successful.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/child_done.png" alt="child_done" width="25%" div align=center />

#### 6.3 Control all devices in the Mesh network.

- Access the Mesh page, tap on the corresponding root node to enter the control page. On the control page, you can control the lighting effects of all devices within the Mesh 

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/root_control.png" alt="root_control" width="25%" div align=center />

#### 6.4 Group control

- Access the Mesh page, tap on the "Group" option in the lower-left corner.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/click_group.png" alt="click_group" width="25%" div align=center />

- Create a new Mesh Group.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/select_device_for_group.png" alt="select_device_for_group" width="25%" div align=center />

- Use the created Group page to control the devices associated with that group.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/rainmaker/led_light/_static/group_control.png" alt="group_control" width="25%" div align=center />

### 7. Precautions

- Currently `Nova Home` only supports Wi-Fi Provisioning over Bluetooth Low Energy, so this example does not support ESP32-S2 chip currently.

                                    

readme of mesh_local_control example

                                        
                                        - [中文版本](https://github.com/espressif/esp-mesh-lite/blob/master/examples/mesh_local_control/README_CN.md)

| Supported Targets | ESP32 | ESP32-C3 | ESP32-S2 | ESP32-S3 | ESP32-C2 | ESP32-C6 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |

# Mesh Local Control Example

## Introduction

This example will introduce how to implement a device connection to a remote external server based on Mesh-Lite. Different from ESP-WIFI-MESH, each device in the Mesh-Lite network can independently access the external network.

This example implements the function of device data transmission in the mesh network to the TCP server.

**It is recommended to compile with esp-idf version 4.4**

## Hardware

* At least 2 x ESP32 development boards
* 1 x router that supports 2.4G

## Process

ESP-Mesh-Lite is developed based on ESP-IDF functions and tools. Therefore, the ESP-IDF development environment must be set up first. You can refer to [Setting up Development Environment](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html) for detailed steps. Afterward, you can build the example directly in ESP-Mesh-Lite, similar to building the example in ESP-IDF.

### Run TCP server

1. Connect PC or the mobile phone to the router.
2. Use a TCP testing tool (any third-party TCP testing software) to create a TCP server.

### Configure the devices

Enter `idf.py menuconfig`, and configure the followings under the submenu "Example Configuration".

 * The router information.
 * ESP-WIFI-MESH network: The network password length should be between 8 and 64 bits (both exclusive), and the network will not be encrypted if you leave the password blank.
 * TCP server: the information of the TCP server run on the PC.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/mesh_local_control/device_config.png" alt="device_config" width="80%" div align=center />

### Build and Flash

CMake:
```shell
idf.py erase_flash flash monitor -p /dev/ttyUSBx
```

### Run

ESP-WIFI-MESH devices send the real-time device status to the TCP server at an interval of three seconds.
                                    

readme of no_router example

                                        
                                        - [中文版本](https://github.com/espressif/esp-mesh-lite/blob/master/examples/no_router/README_CN.md)

# No Router Example

## Introduction

It introduces a quick way to build an ESP-Mesh-Lite network without a router. For details on other network configuration methods, please refer to [README](https://github.com/espressif/esp-mesh-lite/blob/master/examples/mesh_local_control/README.md). Before running this example, please firstly go through [User Guide](https://github.com/espressif/esp-mesh-lite/blob/master/components/mesh_lite/User_Guide.md).

## Configure

To run this example, you need at least two development boards, one configured as a root node, and the other a non-root node. In this example, all the devices are non-root nodes by default.

- Root node: There is only one root node in an ESP-Mesh-Lite network. `MESH-LITE` networks can be differentiated by their `MESH_LITE_ID` and channels.
- Non-root node: Includes leaf nodes and intermediate nodes, which automatically select their parent nodes according to the network conditions.
	- Leaf node: A leaf node cannot also be an intermediate node, which means leaf node cannot has any child nodes.

You need to go to the submenu `Example Configuration` and configure one device as a root node, and the others as non-root nodes with `idf.py menuconfig`(CMake). 

You can also go to the submenu `Component config -> ESP Wi-Fi Mesh Lite`, and configure the ESP-Mesh-Lite related parameters such as the max number of layers allowed and the `MESH_LITE_ID`.

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/no_router/example_config.png" alt="example_config" width="80%" div align=center />

<img src="https://raw.githubusercontent.com/espressif/esp-mesh-lite/master/examples/no_router/mesh_config.png" alt="mesh_config" width="80%" div align=center />

## Run

1. Initialize Wi-Fi, and start ESP-Mesh-Lite according to configuration;
2. Create a timer: print at the specified time the ESP-Mesh-Lite network information about layers, and the parent node's signal strength and the remaining memory.

```c
I (1386) vendor_ie: Mesh ID: 77
W (1390) vendor_ie: Error Get[4354]
W (1394) vendor_ie: Error Get[4354]
I (1399) ESP_Mesh_Lite_Comm: msg action add success
I (1405) ESP_Mesh_Lite_Comm: Bind Socket 54, port 6364
I (1410) ESP_Mesh_Lite_Comm: Bind Socket 55, port 6363
I (1416) ESP_Mesh_Lite_Comm: Bind Socket 56, port 6366
I (1421) ESP_Mesh_Lite_Comm: Bind Socket 57, port 6365
I (1428) ESP_Mesh_Lite_Comm: msg action add success
I (1433) no_router: Child node
I (1436) Mesh-Lite: Mesh-Lite connecting
I (1442) main_task: Returned from app_main()
I (4274) vendor_ie: Mesh-Lite Scan done
I (4276) vendor_ie: Find ESP_Bridge_1eb259
I (4276) vendor_ie: RTC store: ssid:ESP_Bridge_1eb259; bssid:58:cf:79:1e:b2:59 crc:3027520052
I (6340) wifi:ap channel adjust o:1,1 n:13,2
I (6340) wifi:new:<13,2>, old:<1,1>, ap:<13,2>, sta:<13,2>, prof:1
I (7031) wifi:state: init -> auth (b0)
I (7033) ESP_Mesh_Lite_Comm: Retry to connect to the AP
I (7044) wifi:state: auth -> assoc (0)
I (7057) wifi:state: assoc -> run (10)
I (7071) wifi:connected with ESP_Bridge_1eb259, aid = 1, channel 13, 40D, bssid = 58:cf:79:1e:b2:59
I (7072) wifi:security: WPA2-PSK, phy: bgn, rssi: -12
I (7074) wifi:pm start, type: 1

I (7077) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 0, mt_pti: 25000, mt_time: 10000
I (7154) wifi:AP's beacon interval = 102400 us, DTIM period = 2
I (7155) Mesh-Lite: netif network segment conflict check
I (7156) ip select: IP Address:192.168.5.1
I (7160) ip select: GW Address:192.168.5.1
I (7164) ip select: NM Address:255.255.255.0
I (7170) bridge_common: ip reallocate new:192.168.5.1
W (7175) bridge_wifi: SoftAP IP network segment has changed, deauth all station
I (8087) esp_netif_handlers: sta ip: 192.168.5.2, mask: 255.255.255.0, gw: 192.168.5.1
I (8088) bridge_wifi: Connected with IP Address:192.168.5.2
I (8091) ip select: IP Address:192.168.6.1
I (8096) ip select: GW Address:192.168.6.1
I (8101) ip select: NM Address:255.255.255.0
I (8106) bridge_common: ip reallocate new:192.168.6.1
W (8112) bridge_wifi: SoftAP IP network segment has changed, deauth all station
I (8120) vendor_ie: RTC store: ssid:ESP_Bridge_1eb259; bssid:58:cf:79:1e:b2:59 crc:3027520052
I (11442) no_router: System information, channel: 13, layer: 2, self mac: 58:cf:79:e9:9e:c0, parent bssid: 58:cf:79:1e:b2:59, parent rssi: -14, free heap: 209280
I (21442) no_router: System information, channel: 13, layer: 2, self mac: 58:cf:79:e9:9e:c0, parent bssid: 58:cf:79:1e:b2:59, parent rssi: -13, free heap: 209280
I (31442) no_router: System information, channel: 13, layer: 2, self mac: 58:cf:79:e9:9e:c0, parent bssid: 58:cf:79:1e:b2:59, parent rssi: -13, free heap: 209280
```

                                    

Links

Supports all targets

License: Apache-2.0

To add this component to your project, run:

idf.py add-dependency "espressif/mesh_lite^0.10.2"

or download archive

Dependencies

  • espressif/cmake_utilities 0.*
  • espressif/iot_bridge 0.*
  • ESP-IDF >=4.3
  • Examples:

    led_light

    more details

    To create a project from this example, run:

    idf.py create-project-from-example "espressif/mesh_lite^0.10.2:led_light"

    or download archive (327 bytes)

    mesh_local_control

    more details

    To create a project from this example, run:

    idf.py create-project-from-example "espressif/mesh_lite^0.10.2:mesh_local_control"

    or download archive (184 bytes)

    no_router

    more details

    To create a project from this example, run:

    idf.py create-project-from-example "espressif/mesh_lite^0.10.2:no_router"

    or download archive (186 bytes)

    Stats

    • Archive size
      Archive size: 3.49 MB
    • Downloaded in total
      Downloaded in total 498 times
    • Downloaded this version
      This version: 27 times

    Badge

    espressif/mesh_lite version: 0.10.2
    |