espressif/esp_hosted

12 examples

• host_bluedroid_ble_compatibility_test

  This example tests Bluetooth compatibility with mobile phones using the ESP32-P4 Dev Board as the BT Host, connected to an ESP32 co-processor via…

  12.51 KB
• host_bluedroid_bt_hid_mouse_device

  This example demonstrates how to implement a Bluetooth HID device using the Classic Bluetooth HID profile APIs. It simulates a Bluetooth HID mouse…

  10.70 KB
• host_bluedroid_host_only

  This example demonstrates a Bluetooth Host using ESP-Hosted as HCI IO to the BT Controller. It is modified from the bt_discovery example and includes…

  6.14 KB
• host_bt_controller_mac_addr

  This example demonstrates how to change the MAC Address for a BLE device, resulting in the appearance of a `Bluedroid_Beacon` device with the…

  7.47 KB
• host_nimble_bleprph_host_only_uart_hci

  This example demonstrates how to use UART transport for Bluetooth Low Energy (BLE) peripheral applications on ESP32. It includes configurations for…

  501.02 KB
• host_nimble_bleprph_host_only_vhci

  This example uses the Bluetooth Hosted HCI transport provided by ESP-Hosted, requiring the Bluetooth controller and default uart-transport to be…

  13.26 KB
• host_performs_slave_ota

  This example demonstrates ESP-Hosted Transport OTA, enabling the update of slave firmware through an existing ESP-Hosted connection (SDIO/SPI/UART)…

  31.39 KB
• host_sdcard_with_hosted

  This example demonstrates how to use an SD card on an ESP32-P4 dev board with ESP-Hosted using SDIO communication. It initializes ESP-Hosted and Wi-…

  12.44 KB
• host_transport_config

  This example demonstrates how to configure ESP-Hosted transport interfaces (SDIO, SPI, UART) before initialization. It showcases getting the default…

  6.63 KB
• host_wifi_easy_connect_dpp_enrollee

  This example demonstrates how to configure ESP devices as an enrollee using the Device Provisioning Protocol (DPP), also known as Wi-Fi Easy Connect.…

  6.26 KB
• host_wifi_itwt

  This example shows how to use the itwt (implicit WiFi Target Wake Time) feature of WiFi, which only works in station mode and requires an access…

  14.98 KB
• slave

  The ESP-Hosted MCU Slave Example provides firmware that enables host MCUs to access Wi-Fi and Bluetooth capabilities via ESP32 series co-processors…

  429.30 KB