LittleFS for ESP-IDF. # What is LittleFS? [LittleFS](https://github.com/ARMmbed/littlefs) is a small fail-safe filesystem for microcontrollers. We ported LittleFS to esp-idf (specifically, the ESP32) because SPIFFS was too slow, and FAT was too fragile. # How to Use There are two ways to add this component to your project 1. As a ESP-IDF managed component: In your project directory run ``` idf.py add-dependency joltwallet/littlefs==1.5.5 ``` 2. As a submodule: In your project, add this as a submodule to your `components/` directory. ``` git submodule add https://github.com/joltwallet/esp_littlefs.git git submodule update --init --recursive ``` The library can be configured via `idf.py menuconfig` under `Component config->LittleFS`. ### Example User @wreyford has kindly provided a [demo repo](https://github.com/wreyford/demo_esp_littlefs) showing the use of `esp_littlefs`. A modified copy exists in the `example/` directory. # Documentation See the official [ESP-IDF SPIFFS documentation](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/storage/spiffs.html), basically all the functionality is the same; just replace `spiffs` with `littlefs` in all function calls. Also see the comments in `include/esp_littlefs.h` Slight differences between this configuration and SPIFFS's configuration is in the `esp_vfs_littlefs_conf_t`: 1. `max_files` field doesn't exist since we removed the file limit, thanks to @X-Ryl669 2. `partition_label` is not allowed to be `NULL`. You must specify the partition name from your partition table. This is because there isn't a define `littlefs` partition subtype in `esp-idf`. The subtype doesn't matter. ### Filesystem Image Creation At compile time, a filesystem image can be created and flashed to the device by adding the following to your project's `CMakeLists.txt` file: ``` littlefs_create_partition_image(partition_name path_to_folder_containing_files) ``` For example, if your partition table looks like: ``` # Name, Type, SubType, Offset, Size, Flags nvs, data, nvs, 0x9000, 0x6000, phy_init, data, phy, 0xf000, 0x1000, factory, app, factory, 0x10000, 1M, graphics, data, spiffs, , 0xF0000, ``` and your project has a folder called `device_graphics`, your call should be: ``` littlefs_create_partition_image(graphics device_graphics) ``` # Performance Here are some naive benchmarks to give a vague indicator on performance. Formatting a ~512KB partition: ``` FAT: 963,766 us SPIFFS: 10,824,054 us LittleFS: 2,067,845 us ``` Writing 5 88KB files: ``` FAT: 13,601,171 us SPIFFS*: 118,883,197 us LittleFS**: 6,582,045 us LittleFS***: 5,734,811 us *Only wrote 374,784 bytes instead of the benchmark 440,000, so this value is extrapolated **CONFIG_LITTLEFS_CACHE_SIZE=128 ***CONFIG_LITTLEFS_CACHE_SIZE=512 (default value) ``` In the above test, SPIFFS drastically slows down as the filesystem fills up. Below is the specific breakdown of file write times for SPIFFS. Not sure what happens on the last file write. ``` SPIFFS: 88000 bytes written in 1325371 us 88000 bytes written in 1327848 us 88000 bytes written in 5292095 us 88000 bytes written in 19191680 us 22784 bytes written in 74082963 us ``` Reading 5 88KB files: ``` FAT: 3,111,817 us SPIFFS*: 3,392,886 us LittleFS**: 3,425,796 us LittleFS***: 3,210,140 us *Only read 374,784 bytes instead of the benchmark 440,000, so this value is extrapolated **CONFIG_LITTLEFS_CACHE_SIZE=128 ***CONFIG_LITTLEFS_CACHE_SIZE=512 (default value) ``` Deleting 5 88KB files: ``` FAT: 934,769 us SPIFFS*: 822,730 us LittleFS**: 31,502 us LittleFS***: 20,063 us *The 5th file was smaller, did not extrapolate value. **CONFIG_LITTLEFS_CACHE_SIZE=128 ***CONFIG_LITTLEFS_CACHE_SIZE=512 (default value) ``` # Tips, Tricks, and Gotchas * LittleFS operates on blocks, and blocks have a size of 4096 bytes on the ESP32. * A freshly formatted LittleFS will have 2 blocks in use, making it seem like 8KB are in use. # Running Unit Tests To flash the unit-tester app and the unit-tests, clone or symbolicly link this component to `$IDF_PATH/tools/unit-test-app/components/littlefs`. Make sure the folder name is `littlefs`, not `esp_littlefs`. Then, run the following: ``` cd $IDF_PATH/tools/unit-test-app idf.py menuconfig # See notes idf.py -T littlefs -p YOUR_PORT_HERE flash monitor ``` In `menuconfig`: * Set the partition table to `components/littlefs/partition_table_unit_test_app.csv` * Double check your crystal frequency `ESP32_XTAL_FREQ_SEL`; my board doesn't work with autodetect. To test on an encrypted partition, add the `encrypted` flag to the `flash_test` partition in `partition_table_unit_test_app.csv`. I.e. ``` flash_test, data, spiffs, , 512K, encrypted ``` Also make sure that `CONFIG_SECURE_FLASH_ENC_ENABLED=y` in `menuconfig`. The unit tester can then be flashed via the command: ``` idf.py -T littlefs -p YOUR_PORT_HERE encrypted-flash monitor ``` # Breaking Changes * July 22, 2020 - Changed attribute type for file timestamp from `0` to `0x74` ('t' ascii value). * May 3, 2023 - All logging tags have been changed to a unified `esp_littlfs`. # Acknowledgement This code base was heavily modeled after the SPIFFS esp-idf component.
idf.py add-dependency "joltwallet/littlefs^1.5.5"